FEM modeling of crack nucleation and crack propagation fretting fatigue maps: Plasticity effect
نویسندگان
چکیده
منابع مشابه
Fretting Fatigue with Cylindrical-On-Flat Contact: Crack Nucleation, Crack Path and Fatigue Life
Fretting fatigue experiments and finite element analysis were carried out to investigate the influence of cylindrical-on-flat contact on crack nucleation, crack path and fatigue life of medium-carbon steel. The location of crack nucleation was predicted using the maximum shear stress range criterion and the maximum relative slip amplitude criterion. The prediction using the maximum relative sli...
متن کاملIntroduction of a Fretting-Fatigue Mapping concept: Development of a dual crack nucleation – crack propagation approach to formalize Fretting Fatigue damage
Fretting fatigue induced by combined localized cyclic contact motion and external bulk fatigue loadings may result in premature and dramatic failure of the contacting components. Depending on fretting and fatigue loading conditions, crack nucleation and possibly crack propagation can be activated. This paper proposes a procedure for estimating these two damage thresholds. The crack nucleation b...
متن کاملExtended Finite Element Method for Fretting Fatigue Crack Propagation
In this paper, the extended finite element method (X-FEM) is considered for the analysis of fretting fatigue problems. A two-dimensional implementation of the XFEM is carried out within the finite element software ABAQUS by means of user subroutines, and crack propagation in fretting fatigue problems is investigated. On utilizing the non-linear contact capabilities of this code, the numerical t...
متن کاملStochastic modeling of fatigue crack propagation
This paper presents a stochastic model of fatigue-induced crack propagation in metallic materials. The crack growth rate predicted by the model is guaranteed to be non-negative. The model structure is built upon the underlying principle of Karhunen±Lo eve expansion and does not require solutions of stochastic dierential equations in either Wiener integral or Itô integral setting. As such this ...
متن کاملThree-dimensional Simulation of Fretting Crack Nucleation and Growth
Fretting nucleation models and three-dimensional finite element analyses are used to compute the fretting fatigue life for metallic components. The models predict crack nucleation cycles and location(s). Discrete crack growth simulations provide stress intensity factor histories, with multiple, non-planar, three-dimensional cracks possible. The histories are input into crack growth rate model(s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wear
سال: 2015
ISSN: 0043-1648
DOI: 10.1016/j.wear.2015.01.037