Finite element analysis of a journal bearing lubricated with nano lubricants
نویسندگان
چکیده
منابع مشابه
Stability Analysis of Three-Lobe Journal Bearing Lubricated with a Micropolar Fluids
Abstract—In this paper, the dynamic characteristics of a threelobe journal bearing lubricated with micropolar fluids are determined by the linear stability theory. Lubricating oil containing additives and contaminants is modelled as micropolar fluid. The modified Reynolds equation is obtained using the micropolar lubrication theory .The finite difference technique has been used to determine the...
متن کاملFinite Element Analysis of Safety Mechanism in a Mechanical Controller
In this study, dynamic behavior of safety mechanism of a mechanical controller is investigated using 3D-FE simulation. This paper is concentrated on controller of a high acceleration projectile. The controller is located in the top of the projectile. Safety mechanism is divided to deformable and rigid parts. Deformable and rigid parts are simulated in Abaqus and Adams commercial soft wares; res...
متن کاملFinite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملLateral Dynamics and Stability Analysis of a Gas Compressor Supported by Hybrid and Active Lubricated Multirecess Journal Bearing
Fluid film forces are generated in multirecess journal bearings by two types of lubrication mechanism: the hydrostatic lubrication in the bearing recesses and hydrodynamic lubrication in the bearing lands, when operating in rotation. The combination of both lubrication mechanism leads to hybrid journal bearings (HJB). When part of hydrostatic pressure is also dynamically modified by means of hy...
متن کاملthree-dimensional analysis of bearing capacity of square footings on convex slopes by finite element method
soil slopes are sometimes curved in plan rather than being straight. this curvature,especially when it is convex, decreases the bearing capacity of the slope. finite element methodhas been used here in this research to investigate the reducing effect of curvature on bearingcapacity of a slope. failure of soil has been assumed to be according to mohr-coulomb criteria;but the flow rule of the soi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: FME Transactions
سال: 2020
ISSN: 1451-2092,2406-128X
DOI: 10.5937/fme2002476r