Finite Element Method-Based Kinematics and Closed-Loop Control of Soft, Continuum Manipulators
نویسندگان
چکیده
منابع مشابه
Closed-Form Inverse Kinematics for Continuum Manipulators
This paper presents a novel, analytical approach to solving inverse kinematics for multi-section continuum robots, defined as robots composed of a continuously bendable backbone. The problem is decomposed into several simpler subproblems. First, this paper presents a solution to the inverse kinematics problem for a single-section trunk. Assuming endpoints for all sections of a multi-section tru...
متن کاملDynamic Load Carrying Capacity of Flexible Manipulators Using Finite Element Method and Pontryagin’s Minimum Principle
In this paper, finding Dynamic Load Carrying Capacity (DLCC) of flexible link manipulators in point to-point motion was formulated as an optimal control problem. The finite element method was employed for modelling and deriving the dynamic equations of the system. The study employed indirect solution of optimal control for system motion planning. Due to offline nature of the method, many diffic...
متن کاملEvaluation of Fracture Parameters by Coupling the Edge-Based Smoothed Finite Element Method and the Scaled Boundary Finite Element Method
This paper presents a technique to evaluate the fracture parameters by combining the edge based smoothed finite element method (ESFEM) and the scaled boundary finite element method (SBFEM). A semi-analytical solution is sought in the region close to the vicinity of the crack tip using the SBFEM, whilst, the ESFEM is used for the rest of the domain. As both methods satisfy the partition of unity...
متن کاملInelastic Continuum Modeling of Carbon Nanotube,s Behavior Using Finite Element Method
This paper describes a continuum model for analyzing the inelastic behavior of a single walled carbon nanotube (SWCNT) in different loading conditions. Because of limitations in using molecular dynamics (and other atomic methods) to model the failure load of the SWCNT, continuum mechanics methods are considered in this paper. Based on some experimental and theoretical results, an elasto-plastic...
متن کاملMicroprocessor-Based Closed-Loop Control
Microprocessor-Based Closed-Loop Motor Control A dedi~ated microprocessor control system was built from chip level using the Motorola M6800 family. The system has a keyboard and the interfaces for four LED displays, a phototransistor and a digital-to-analog converter. The system was designed to execute a closed loop motor control. The system accepts key input in RPM and drives the motor at the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Soft Robotics
سال: 2018
ISSN: 2169-5172,2169-5180
DOI: 10.1089/soro.2017.0079