Flame-Retardant Polyamide Powder for Laser Sintering: Powder Characterization, Processing Behavior and Component Properties

Flame-Retardant Polyamide 6/Carbon Nanotube Nanofibers: Processing and Characterization

Polyamide 6 (PA6) was melt-blended with an intumescent flame retardant (FR), multi-wall carbon nanotubes (MWNTs), and nanoclay particles to produce multi-component FR-PA6 nanocomposites. FR-PA6 nanofibers were processed from varied nanocomposite formulations via electrospinning. Electrospinnability, morphology, along with combustion and thermal properties of the nanofibers were investigated. Bo...

Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography

Defects produced during selective laser sintering (SLS) are difficult to non-destructively detect after build completion without the use of X-ray-based methods. Overcoming this issue by assessing integrity on a layer-by-layer basis has become an area of significant interest for users of SLS apparatus. Optical coherence tomography (OCT) is used in this study to detect surface texture and sub-sur...

Nano Powder Direct Metal Sintering Systems Specification

Experimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder

Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...

Experimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder

Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...