Flexural behavior of 3Dpara-aramid/phenolic/nano (MWCNT) composites
نویسندگان
چکیده
منابع مشابه
Flexural Behavior of Cementitious Composites Reinforced by Synthetic Fibers
The application of fibers to reinforce cementitious materials is a well-known subject. At first, asbestos fibers are used in industrial process to produce fiber reinforced cement sheets. Thereafter, various types of synthetic fibers are produced and used as asbestos substitutes. The aim of the present work is to evaluate the effect of synthetic fibers on the flexural behavior of cementitious co...
متن کاملFlexural Properties and Orthotropic Swelling Behavior of Bagasse/thermoplastic Composites
The flexural properties of commercial bagasse-filled polyethylene (PE) and polypropylene (PP) composites were determined as a function of strain rate at room temperature. The applied strain rates were 1.5 ×10, 3.75×10, 7.5×10, and 1.5×10 s. The flexural modulus tended to increase linearly for the two types of composites with the logarithm of strain rate. The bending strength of polypropylene co...
متن کاملFlexural behavior of carbon nanotube-modified epoxy/basalt composites
Copyright © Korean Carbon Society http://carbonlett.org Abstract The use of carbon nanotubes (CNTs) as a reinforcing material in a polymer matrix has increased in various industries. In this study, the flexural behavior of CNT-modified epoxy/ basalt (CNT/epoxy/basalt) composites is investigated. The effects of CNT modification with silane on the flexural properties of CNT/epoxy/basalt composite...
متن کاملFlexural Behavior of Needle Punch Glass/jute Hybrid Mat Composites
In this research, creation of higher mechanical natural fiber mat composites was proposed. The hybrid mat with jute and glass mat was fabricated by needle punching system, in which jute mat was placed on glass mat. The ratio of jute and glass mat layers was set to be 1:0,1:1,1:2 and 2:1, respectively. The composites were fabricated by hand-lay up method with unsaturated polyester resin after ne...
متن کاملOptimization of MWCNT – Metal Matrix Composites feedstocks
Micro powder injection moulding-μPIM is a powder injection moulding-PIM variant for microparts/devices. This study is about the optimization and respective production of nanocomposites feedstocks suitable to μPIM process. The optimization of MWCNT content in metal matrix composites-MMC feedstock were performed using torque rheometry until achieve homogeneous feedstocks with suitable flowability...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2018
ISSN: 2046-2069
DOI: 10.1039/c7ra13437a