Fracture studies of polypropylene/nanoclay composite. Part II: Failure mechanism under fracture loads
نویسندگان
چکیده
منابع مشابه
Fracture Failure Mechanism
The present study investigates the failure mechanisms of industrial fiber materials 13 a custom designed fiber cutting performance test bench. The fracture morpholog 14 fibers are examined by scanning electron microscopy. The analysis reveals that fiber cutting can be 15 distinguished according to four distinct stages of fiber failure represented by shearing, cutting, 16 brittle fracture, and t...
متن کاملFracture Mechanism of CoCrMo Porous Nano-composite Prepared by Powder Metallurgy Route
The main aim of this research was to find the mechanism for the failure of the CoCrMo porous nano-composite by characterizing microstructural changes and fractured surface after compression test. For this purpose, porous nano-composites were prepared with the addition of bioactive glass nano-powder to Co-base alloy with 22.5% porosity by the combination of space-holder and powder metallurgy tec...
متن کاملSuppression of Fracture Failure of Structures by Composite Design Based on Fracture Mechanics
This paper discusses the use of fracture mechanics for the microstructure tailoring of a fiber reinforced Engineered Cementitious Composite (ECC) to achieve extreme tensile ductility at the composite scale. It demonstrates that fracture mechanics applied to control fracture phenomena at the micro and meso material scales can lead to suppression of fracture failure at the macro structural scale....
متن کاملBrittle Fracture Failure of Composite (Non- Ceramic) Insulators
In this work, additional input is provided into the ongoing discussion on the mechanisms, causes and remedies of brittle fracture failures of composite (non-ceramic) insulators. This has been done partially to complement the recently published article on this topic entitled “ IEEE Task Force Report: Brittle Fracture in Non-Ceramic Insulators” [1]. At first, the most important characteristics of...
متن کاملMixed-mode I/II Interlaminar Fracture of CF/PEI Composite Material
Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Testing
سال: 2008
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2008.01.011