Frequency-noise measurements of optical frequency combs by multiple fringe-side discriminator

Frequency-noise measurements of optical frequency combs by multiple fringe-side discriminator

The frequency noise of an optical frequency comb is routinely measured through the hetherodyne beat of one comb tooth against a stable continuous-wave laser. After frequency-to-voltage conversion, the beatnote is sent to a spectrum analyzer to retrive the power spectral density of the frequency noise. Because narrow-linewidth continuous-wave lasers are available only at certain wavelengths, het...

Optical Frequency Combs: From Frequency Metrology to Optical Phase Control

The merging of continuous wave laser-based precision optical-frequency metrology with mode-locked ultrafast lasers has led to precision control of the visible and near-infrared frequency spectrum produced by mode-locked lasers. Such a phase-controlled mode-locked laser forms the foundation of a “femtosecond optical-frequency comb generator” with a regular comb of sharp lines with well-defined f...

Colloquium: Femtosecond optical frequency combs

Recently there has been a remarkable synergy between the technologies of precision laser stabilization and mode-locked ultrafast lasers. This has resulted in control of the frequency spectrum produced by mode-locked lasers, which consists of a regular comb of sharp lines. Thus such a controlled mode-locked laser is a ‘‘femtosecond optical frequency comb generator.’’ For a sufficiently broad com...

Distribution of an Ultrastable Frequency Reference Using Optical Frequency Combs

Noise-induced linewidth in frequency combs.

Frequency combs generated by trains of pulses emitted from mode-locked lasers are analyzed when the center time and phase of the pulses undergo noise-induced random walk, which broadens the comb lines. Asymptotic analysis and computation reveal that, when the standard deviation of the center-time jitter of the nth pulse scales as n(p/2) where p is a jitter exponent, the linewidth of the kth com...