Full Coverage Shaped-Hole Film Cooling in an Accelerating Boundary Layer With High Freestream Turbulence
نویسندگان
چکیده
منابع مشابه
Performance of a Showerhead and Shaped Hole Film Cooled Vane at High Freestream Turbulence and Transonic Conditions
An experimental study was performed to measure surface Nusselt number and film cooling effectiveness on a film cooled first stage nozzle guide vane using a transient thin film gauge (TFG) technique. The information presented attempts to further characterize the performance of shaped hole film cooling by taking measurements on a row of shaped holes downstream of leading edge showerhead injection...
متن کاملTowards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer
The objective of this work is to develop deep theoretical methods that are based on the solution of the integral boundary layer equations for investigating film cooling in liquid rocket engine. The integral model assumes that heat is transferred from hot free stream gas to the liquid film both by convection and radiation. The mass is transferred to the free srteam gas by the well-known blowing ...
متن کاملAn Investigation of the Physical Mechanism of Heat Transfer Augmentation in Boundary Layer Flows Subject to Freestream Turbulence
Water tunnel experiments have been performed to examine how large scale, high intensity freestream turbulence affects heat transfer through a laminar flat plate boundary layer. Time-Resolved Digital Particle Image Velocimetry (TRDPIV) was used to examine the flow field along with timeresolved heat transfer from the wall. The surface heat flux was measured with a newly developed thin-film sensor...
متن کاملPlanetary Boundary Layer Turbulence
In previous chapters boundary layers were evident as thin layers across which thermal, dynamic, and material properties of a free interior flow make a transition to their boundary values and/or boundary fluxes. In those cases the thinness of the boundary layer was typically a statement of the smallness of the relevant diffusivity; e.g., the depth h of the laminar Ekman boundary layer scales as ...
متن کاملFilm Cooling Measurements for Novel Hole Configurations
The effect of film cooling slot exit area and shape is studied. Detailed heat transfer coefficient and film effectiveness measurements are obtained simultaneously using a single transient IR thermography technique. Two designs with a crescent shaped exit and a slot exit are considered. The results show that the crescent shaped exit provides significantly higher film cooling effectiveness than t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Turbomachinery
سال: 2016
ISSN: 0889-504X,1528-8900
DOI: 10.1115/1.4031867