Gas-Particle Two-Phase Jet Flow from Slot Nozzle and Micro-Blasting Process
نویسندگان
چکیده
منابع مشابه
Single-phase and two-phase cooling using hybrid micro-channel/slot-jet module
This paper explores the single-phase and two-phase cooling performance of a hybrid micro-channel/slot-jet module using HFE-7100 as working fluid. Three-dimensional numerical simulation using the k–e turbulent model is used to both assess the single-phase performance and seek a geometry that enhances heat removal capability and surface temperature uniformity while decreasing mean surface tempera...
متن کاملMixing Process in the Jet Flow of Lobed Nozzle
The vortical and turbulent structure changes in the near field (X/D<3.0) of the jet mixing flow caused by a lobed nozzle had been investigated experimentally in the present study. The techniques of planar Laser Induced Fluoresce (LIF) and Particle Image Velocimetry (PIV) were used to accomplish the flow visualization and velocity field measurements. The experimental results showed that, compare...
متن کاملEffect of Various Nozzle Profiles on Performance of a Two Phase Flow Jet Pump
This paper reports on the results of experimental investigations on the performance of a jet pump operated under selected primary flows to optimize the related parameters. For this purpose a two-phase flow jet pump was used employing various profiles of nozzles as the primary device which was designed, fabricated and used along with the combination of mixing tube and diffuser. The profiles empl...
متن کاملSimulation of gas-liquid two phase flow in upriser pipe of gas-lift systems
Gas-lift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of liquid column. They are widely used in various industrial applications such as oil extracting in petroleum industries. Gas-liquid flow being the main part of the flow through these systems, flowing in vertical pipes of gas-lift pumps has different regimes namely bubbly, slug, chur...
متن کاملNozzle Design for Low-Pressure Micro Abrasive Waterjet Blasting via CFD Simulations
Waterjet technology has been extensively used in machining processes since 1970’s, and in the last years it has evolved to a precision machining tool for micro workpieces, namely micro abrasive-waterjet blasting (μAWJB); nevertheless, as a finishing process to remove micro-burrs it has not been yet developed. Our experimental studies on low-pressure μAWJB showed that conventional nozzles which ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series B
سال: 2006
ISSN: 1340-8054,1347-5371
DOI: 10.1299/jsmeb.49.705