Grain Refinement of Al-5Ti-0.62C-0.2Nd Grain Refiner for Commercial Pure Aluminum and Its Effect on Mechanical Properties
نویسندگان
چکیده
منابع مشابه
Influence of grain refiner addition and heat treatment on the mechanical properties of Al-Si alloy
In the present investigation, an attempt is made to study the effect of addition of grain refinement on Al-Si alloy, when it is subjected to the combined grain refiner addition (Al-5T-1B) and subjected to mechanical vibration and heat treatment. The material is tested for hardness property and dry sliding wear properties. The results of the present investigation indicate that there is a conside...
متن کاملEFFECT OF COOLING RATE AND GRAIN REFINEMENT ON THE MICROSEGREGATION IN Al-4.8 wt.% Cu ALLOY
Microsegregation is one of the most important phenomena occurs during solidification. It usually results in formation of some unexpected second phases which generally affect the mechanical properties and specially reduce the workability of casting products. The aim of this research is to study the effect of cooling rate and grain refinement on the microsegregation in Al-4.8 wt.% Cu. For this p...
متن کاملMagnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling
The effect of chemical composition and the hot rolling operations on the microstructure and mechanical properties of in situ aluminum matrix composite with Mg2Si phase as the reinforcement was studied. It was revealed that the modification by phosphorous results in the rounder (more spherical) primary and secondary (eutectic) magnesium silicide intermetallics. During hot rolling, the primary pa...
متن کاملthe effects of mechanical vibration, grain refinement and modification on the structure and mechanical properties of a380 aluminum alloy
this research concentrates on the effects of low frequency, vertical mechanical vibration during solidification on the microstructure and mechanical properties of a380 aluminum alloy. two series of sr-modified and al-5ti-b grain refined a380 alloy samples were solidified in both static and dynamic conditions in the frequency and amplitude of 60 hz and 0.2 m, respectively. their physical, micro-...
متن کاملGrain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy
The effects of rare earth addition and hot extrusion process on the grain refinement of magnesium alloy were studied. The as-cast Mg-6Al-1Zn (AZ61) alloy had the average grain size of ~ 64 µm and its microstructure consisted of α-Mg and Mg17Al12 phase. By partial substitution of Al with Gd to reach Mg-4.8Gd-1.2Al-1Zn alloy, it was observed that the Mg17Al12 phase disappeared and two new interme...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2018
ISSN: 1980-5373,1516-1439
DOI: 10.1590/1980-5373-mr-2018-0302