Health monitoring of joint conditions in steel truss bridges with relative displacement sensors
نویسندگان
چکیده
منابع مشابه
Monitoring of Bridges with Static Strain and Displacement Data
Monitoring of the static response of bridges under service and environmental loading has been recently considered a valid alternative to the more classical methods based on the measurements of the dynamic response and subsequent dynamic system identification. The paper starts reviewing and comparing some of the most common data processing techniques used both in dynamic and in the static monito...
متن کاملFeasibility of Nondestructive Crack Detection and Monitoring for Steel Bridges
FHWA has completed a multiyear study of systems and techniques to identify and characterize cracks in steel bridge structures. The study was conducted by FHWA’s Nondestructive Evaluation (NDE) Laboratory at the Turner-Fairbank Highway Research Center in McLean, VA. The study, called the Steel Bridge Testing Program, was authorized under the 2005 Safe, Accountable, Flexible, Efficient Transporta...
متن کاملAutomated Robotic Monitoring and Inspection of Steel Structures and Bridges
This paper presents visual and 3D structure inspection for steel structures and bridges using a developed climbing robot. The robot can move freely on a steel surface, carry sensors, collect data and then send to the ground station in real time for monitoring as well as further processing. Steel surface image stitching and 3D map building are conducted to provide a current condition of the stru...
متن کاملNeural Monitoring With CMOS Image Sensors
Implantable image sensors have several biomedical applications due to their miniature size, light weight, and low power consumption achieved through sub-micron standard CMOS (Complementary Metal Oxide Semiconductor) technologies. The main applications are in specific cell labeling, neural activity detection, and biomedical imaging. In this paper the recent research studies on implantable CMOS i...
متن کاملModification of Displacement Coefficient Method in Estimation of Target Displacement for Regular Concrete Bridges Based on ASCE 41-06 Standard
Displacement Coefficient Method (DCM) stipulated in the ASCE 41-06 standard is becoming the preferred method for seismic rehabilitation of buildings in many high-seismic-hazard countries. Applications of the method for non-building constructions such as bridges are beyond the scope of this standard. Thus its application to this kind of structure should be approached with care. Target displaceme...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement
سال: 2016
ISSN: 0263-2241
DOI: 10.1016/j.measurement.2015.12.009