Heat Transfer in a Two-Pass Internally Ribbed Turbine Blade Coolant Channel With Cylindrical Vortex Generators

Heat Transfer Analysis of Two Pass Cooling Channel of Gas Turbine Blade with Analytical Wall Function Turbulence Approach

Turbine Blade Tip Cooling and Heat Transfer

ii ACKNOWLEDGEMENTS Behind every success, there is inspiration or support of at least one person. In my case, it was a group of people including my mentor, my family, and my friends. First of all, I would like to thank Dr. Srinath Ekkad for his guidance, wisdom, and financial support. I do not think many advisors would go to the lab to help his student running an experiment. Whenever I had any ...

Turbine Blade Cascade Heat Transfer Analysis Using CFD –A Review

Heat transfer analysis on a turbine blade cascade using CFD is reviewed in this paper based upon the literature available. The flow conditions across turbine blades are complex because of three dimensional configuration of the blade. Axial flow turbine blade design is hectic because understanding of control flows, prediction and analysis is a tedious task. The flow behaviour in a turbine blade ...

Large Eddy Simulation of Turbulent Flow and Heat Transfer in a Ribbed Coolant Passage

Numerical simulations of hydrodynamic and thermally fully developed turbulent flow are presented for flow through a stationary duct with periodic array of inline transverse rib turbulators. The rib height to hydraulic diameter ratio e/Dh is 0.1 and the rib pitch to rib height ratio P/e is 10. The effect of secondary flow due to presence of rib turbulators on heat and mass transfer has been inve...

Turbulent Heat Transfer and Pressure Drop in an Internally Ribbed Rectangular Duct

Computational study was carried out to determine average heat transfer coefficients and friction factors for turbulent flow through rectangular ducts with ribs. A commercial finite volume package ANSYS FLUENT 12.1 is used to analyze and visualize the nature of the flow across the ribbed duct The fluid in the duct was air, and the average heat transfer coefficients were determined by measuring t...