Heat Transfer Investigation in an Engine ExhaustType Pulsating Flow
نویسندگان
چکیده
منابع مشابه
Investigation of Laminar Pulsating Nanofluid Flow and Heat Transfer in a Rectangular Channel
In this study, two-dimensional pulsating unsteady flow of nanofluid through a rectangular channel with isothermal walls is investigated numerically. The set of resultant algebraic equations is solved simultaneously using SIMPLE algorithm to obtain the velocity and pressure distribution within the channel. The effects of several parameters, such as volume fraction of different nanoparticles, Rey...
متن کاملHeat Transfer Characteristics in a Heat Exchanger for Turbulent Pulsating Water Flow with Different Amplitudes
The effect of pulsation on the heat transfer rates, for turbulent water stream with upstream pulsation of different amplitudes, in a double-pipe heat exchanger for both parallel and counter flows, with cold water on the shell side, was investigated. Pulsation frequencies, with using a reciprocating device, ranged up to 260 cycles per minute (up to 4.3 Hz) and 5 different displacement amplitudes...
متن کاملExperimental Investigation of Thermal Balance and Valve Cover Heat Transfer in a Small Internal Combustion Engine
Heat transfer in internal combustion engines is one of the most significant topics. Heat transfer may take place through thermal conduction and thermal convection in spark ignition engines. In this study, valve cover heat transfer and thermal balance of an air-cooled engine are investigated experimentally. The thermal balance analysis is a useful method to determine energy distribution and effi...
متن کاملStudy about heat transfer coefficient of water-nanofluid in pulsating heat pipes
Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...
متن کاملStudy about heat transfer coefficient of water-nanofluid in pulsating heat pipes
Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fluid Flow, Heat and Mass Transfer
سال: 2018
ISSN: 2368-6111
DOI: 10.11159/jffhmt.2018.004