High Area Efficiency Bidirectional Silicon-Controlled Rectifier for Low-Voltage Electrostatic Discharge Protection

نویسندگان

چکیده

Continuously scaling down and decreasing operation voltages of ICs, from the 5 V TTL-compatible voltage to 3.3 V, then 1.2 now 0.8 for low-power results in more stringent electrostatic discharge protection design requirements, such as a narrow ESD window, low voltage, high robustness. Based on traditional diode string diode-triggered silicon-controlled rectifiers, an enhanced rectifier is proposed meet requirements low-voltage integrated circuits bidirectional protection. The new device employs additional PMOS NMOS N-well P-well, respectively, offer current paths along surface significantly enhance its TCAD simulation shows that triggered by both strings embedded MOS, making turn faster distribution uniform during ON state owing paths. has excellent dual-directional performance with figure merit 4.01 mA/um2, which about 71% improvement compared conventional rectifier. It also higher area efficiency, lower trigger leakage, turn-on speed. attractive solution ultra-low-voltage ICs.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dummy-Gate Structure to Improve Turn-on Speed of Silicon-Controlled Rectifier (SCR) Device for Effective Electrostatic Discharge (ESD) Protection

Turn-on speed is the main concern for on-chip electrostatic discharge (ESD) protection device, especially in deep submicron complementary metal-oxide semiconductors (CMOS) processes with ultra-thin gate oxide. A novel dummy-gate-blocking silicon-controlled rectifier (SCR) device with substrate-triggered technique is proposed to improve the turn-on speed of SCR device for using in on-chip ESD pr...

متن کامل

Electrostatic Discharge Protection Circuit for High-Speed Mixed-Signal Circuits

ESD, the discharge of electrostatically generated charges into an IC, is one of the most important reliability problems for ultra-scaled devices. This electrostatic charge can generate voltages of up to tens of kilovolts. These very high voltages can generate very high electric fields and currents across semiconductor devices, which may result in dielectric damage or melting of semiconductors a...

متن کامل

A High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications

This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...

متن کامل

High Efficiency Bridgeless Cuk Rectifier for High Voltage Battery Charging Applications

A step-up bridgeless single phase ac-dc power factor correction (PFC) rectifier based on Cuk topology is proposed for high voltage battery charger application. The proposed topology consists of common input stage and parallel output stages. It utilizes one control signal over the whole line cycle. In addition, the proposed converter exhibits low inrush current and low magnetic emissions as clas...

متن کامل

Low-voltage High-efficiency Fast-transient

(ABSTRACT) In order to meet demands for faster and more efficient data processing, modern microprocessors are being designed with lower voltage implementations. The processor voltage supply in future generation processors will decrease to 1.1 V ~ 1.8V. More devices will be packed on a single processor chip, and processors will operate at higher frequencies, beyond 1GHz. Therefore, microprocesso...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Electronics

سال: 2023

ISSN: ['2079-9292']

DOI: https://doi.org/10.3390/electronics12194011