High-Hardness, Water-Stable, and UV-Resistant Conductive Coatings Based on Waterborne PEDOT:PSS/Epoxy/(KH560/SiO2) Composite
نویسندگان
چکیده
Despite the fact that PEDOT:PSS has been successfully used in field of flexible electronics, some its applications domain rigid conductive coating have limited by pricey cost and subpar mechanical properties (hardness, adhesion, moisture absorption) commercially available Clevios™ PH 1000, as well poor conductivity, film formation, self-made PEDOT:PSS. In process investigating low-cost preparation PEDOT-based polymer coatings, we discovered PEDOT:PSS, a waterborne epoxy resin, bio-based curing agent can be blended uniformly to produce good film-forming coatings. Later, addition KH560-modified nano-SiO2 further improved coating’s hardness while ensuring modest increase conductivity. Meanwhile, inadequacies which are not UV-resistant, were considerably synergistic action modified SiO2. The result is method designed for creating coatings UV-resistant may utilized electromagnetic, electrothermal, antistatic shielding applications. Such PEDOT:PSS/epoxy composite system design approach will broaden scope PEDOT:PSS’s application inspire future research practical implementations PEDOT:PSS-based conducting
منابع مشابه
Waterborne coatings
Contact: Dr. Charles F. Palmer Ethox Chemicals [email protected] T +1 864 277 1620 They are used in many industrial and architectural applications. The hydrophobic nature of the alkyd polymer makes them good choices when water repellency is important. However, formulating alkyds into low VOC (volatile organic compound) waterborne coatings results in a number of problems, which can be minimised ...
متن کاملSynergistic Effect of Addition of Fillers on Properties of Interior Waterborne UV-Curing Wood Coatings
A waterborne ultraviolet (UV)-curing coating was prepared on the surface of wood materials with modification of talcum powder and calcium carbonate (CaCO3). When the waterborne UV-curing coatings on the surface of wood materials (WUVCW) was radiated for 1 min by UV (λ = 365 nm) and dried at 40 ◦C for 10 min, it showed good hardness, adhesion, and impact strength, with controlling the talcum con...
متن کاملDevelopment of Corrosion Resistant Zn-Ni-TiO2 Composite Coatings
The Zn-Ni-TiO2 composite coatings were developed on mild steel by electrodeposition method. The bath constituents (ZnSO4.6H2O, NiSO4.6H2O, TiO2, thiamine hydrochloride) and operating conditions (temperature and pH) were optimized by Hull cell method, for peak performance of the coating against corrosion. The coatings were prepare...
متن کاملEnvironmentally friendly hybrid coatings for corrosion protection: silane based pre-treatments and nanostructured waterborne coatings
This thesis considers a nanotechnology approach based on the production of metals pre-treatments and organic coatings (a complete protection system at all) designed from the nanoscale. The final aim is to develop protection systems with improved corrosion protection properties and a low environmental impact. In particular, multifunctional silane hybrid molecules were used to design sol-gel pre-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of composites science
سال: 2023
ISSN: ['2504-477X']
DOI: https://doi.org/10.3390/jcs7020051