High Quality 3D Photonics using Nano Imprint Lithography of Fast Sol-gel Materials
نویسندگان
چکیده
منابع مشابه
3D Simulation of Nano-Imprint Lithography
A proof of concept study of the feasibility of fully three-dimensional (3D) time-dependent simulation of nano-imprint lithography of polymer melt, where the polymer is treated as a structured liquid, has been presented. Considering the flow physics of the polymer as a structured liquid, we have followed the line initiated by de Gennes, using a Molecular Stress Function model of the Doi and Edwa...
متن کاملHigh-quality AlN epitaxy on nano-patterned sapphire substrates prepared by nano-imprint lithography
We report epitaxial growth of AlN films with atomically flat surface on nano-patterned sapphire substrates (NPSS) prepared by nano-imprint lithography. The crystalline quality can be greatly improved by using the optimized 1-μm-period NPSS. The X-ray diffraction ω-scan full width at half maximum values for (0002) and (102) reflections are 171 and 205 arcsec, respectively. The optimized NPSS con...
متن کاملFoldable and Cytocompatible Sol-gel TiO2 Photonics
Integrated photonics provides a miniaturized and potentially implantable platform to manipulate and enhance the interactions between light and biological molecules or tissues in in-vitro and in-vivo settings, and is thus being increasingly adopted in a wide cross-section of biomedical applications ranging from disease diagnosis to optogenetic neuromodulation. However, the mechanical rigidity of...
متن کاملRecent bio-applications of sol–gel materials
This review is devoted to the most recent developments (2000–2005) of sol–gel materials at the interface with biology. In the context of bioencapsulation in mineral hosts, novel synthetic approaches have been designed, allowing the immobilization of numerous proteins, enzymes and immune molecules as well as poly-saccharides, phospholipids and nucleic acids. These efforts have led to the develop...
متن کاملSelective Deposition of Biocompatible Sol-Gel Materials
An aqueous sol-gel route has been developed for electrochemically controlled deposition onto micro and nanofabricated electrodes. TEOS and MeTEOS were hydrolyzed under acidic conditions, and alcohol products were removed by distillation. The resulting clear sol has a hydrolysis ratio between 40 and 45. Following hydrolysis, pH was raised to 5.0 with addition of potassium hydroxide. At room temp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2018
ISSN: 2045-2322
DOI: 10.1038/s41598-018-26261-3