How to design and construct a 3D-printed human head phantom
نویسندگان
چکیده
منابع مشابه
how to construct a 3d mathematical/computer model of the left ventricle
conclusions these studies will enable physicians to diagnose and follow up many cardiac diseases when this software is interfaced within echocardiographic machines. results myocardial fibers initiate from the posterior basal region of the heart, continue through the left ventricular free wall, reach the septum, loop around the apex, ascend, and end at the superior-anterior edge of the left vent...
متن کاملHow to Construct a Mixed Methods Research Design
This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), p...
متن کاملFeasibility of a 3D-printed anthropomorphic patient-specific head phantom for patient-specific quality assurance of intensity-modulated radiotherapy
This study evaluated the feasibility of utilizing a 3D-printed anthropomorphic patient-specific head phantom for patient-specific quality assurance (QA) in intensity-modulated radiotherapy (IMRT). Contoured left and right head phantoms were converted from DICOM to STL format. Fused deposition modeling (FDM) was used to construct an anthropomorphic patient-specific head phantom with a 3D printer...
متن کاملGeometry Calibration Phantom Design for 3D Imaging
Most approaches to 3D x-ray imaging geometry calibration use some well-defined calibration phantom containing point markers. The calibration aims at minimizing the so-called re-projection error, i.e., the error between the detected marker locations in the acquired projection image and the projected marker locations based on the phantom model and the current estimate of the imaging geometry. The...
متن کاملPreparation and fabrication of a full‐scale, sagittal‐sliced, 3D‐printed, patient‐specific radiotherapy phantom
PURPOSE Patient-specific 3D-printed phantoms have many potential applications, both research and clinical. However, they have been limited in size and complexity because of the small size of most commercially available 3D printers as well as material warping concerns. We aimed to overcome these limitations by developing and testing an effective 3D printing workflow to fabricate a large patient-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of 3D Printing in Medicine
سال: 2019
ISSN: 2059-4755,2059-4763
DOI: 10.2217/3dp-2019-0016