Hydroelastic analysis of surface piercing hydrofoil during initial water entry phase
نویسندگان
چکیده
منابع مشابه
Analysis of Mechanical Energy Transport on Free-Falling Wedge during Water-Entry Phase
For better discussing and understanding the physical phenomena and body-fluid interaction of water-entry problem, here mechanical-energy transport wedge, fluid, and each other of water-entry model for free falling wedge is studied by numerical method based on free surface capturing method and Cartesian cut cell mesh. In this method, incompressible Euler equations for a variable density fluid ar...
متن کاملDesign Algorithm of a Free Surface Water Tunnel to Test the Surface-Piercing Propellers (SPP); Case Study Water Tunnel of Babol Noshirvani University of Technology
Surface-Piercing Propellers (SPPs) have been widely used in high speed craft due to some desirable features such as high efficiency, omission of resistance of equipment attached to the propeller and proper functioning of cavitation. Unlike the submerged propellers, theoretical methods have no significant application on simulation of SPPsbecause of problems related to modeling of these propeller...
متن کاملHydroelastic analysis of plates and some approximations
The paper concerns the modelling of very large pontoon-type floating structures by thin beams and plates of shallow draft, excited by regular waves. It is shown how the classical theory of hydroelasticity, involving the concepts of added mass and damping associated with the structural responses, may be reconciled with more recent formulations. In the latter, coupled equations for displacement a...
متن کاملTransient hydroelastic analysis of sandwich beams subjected to slamming in water
This work deals with the transient hydroelastic analysis of a sandwich beam which represents a boat hull. The beam is subjected to slamming pressure while it enters into water with constant vertically downward velocity. A coupled hydroelastic finite element model is developed using higher order shear and normal deformation theories for the faces and the core of the beam and the velocity potenti...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientia Iranica
سال: 2017
ISSN: 2345-3605
DOI: 10.24200/sci.2017.20010