Hypersonic Boundary-Layer Flow with an Obstacle in Thermochemical Equilibrium and Nonequilibrium
نویسندگان
چکیده
منابع مشابه
Influence on the Hypersonic Boundary-Layer Flow
For aerospace or hypersonic cruise vehicle the state of the boundary layer is of great importance because for turbulent boundary layers, the thermal loads and skin friction are higher than in laminar boundary layers. Therefore , knowledge of cooling features and laminar-turbulent transition is necessary for the design of the thermal protection system (TPS). Different strategies are used to redu...
متن کاملNumerical Simulation of Shock-Wave/Boundary/Layer Interactions in a Hypersonic Compression Corner Flow
Numerical results are presented for the shock-boundary layer interactions in a hypersonic flow over a sharp leading edge compression corner. In this study, a second- order Godunov type scheme based on solving a Generalized Riemann Problem (GRP) at each cell interface is used to solve thin shear layer approximation of laminar Navier-Stokes (N-S) equations. The calculated flow-field shows general...
متن کاملNumerical Investigations of Effusion Cooling in Hypersonic Boundary-Layer Flow
Direct numerical simulations (DNS) are carried out to investigate the effect of effu-sion cooling by blowing through spanwise slits and discrete holes in a laminar flat-plate boundary layer at various Mach numbers. The comparison with experimental data for a Mach-2.67 boundary layer with a cool wall and a spanwise slit shows good agreement. For an adiabatic Mach-6 boundary layer, the focus of t...
متن کاملExperimental Investigation of Shock-Wave/Boundary- Layer Interactions Over an Artificially Heated Model in Hypersonic Flow
Experimental tests have been carried out to analyze the effect of wall-to-total temperature ratio on the characteristics of a fully laminar shock-wave/boundary-layer interaction in a Mach 6 high enthalpy flow. Test cases were run in a new high-enthalpy arc-heated wind tunnel developed at Centrospazio in the framework of the ESA/FESTIP program. In order to heat-up the model surface a high temper...
متن کاملPassive Control of Hypersonic Boundary-Layer Transition using Regular Porous Coating
Passive control of hypersonic boundary-layer transition using porous coatings has been studied by theoretical analyses, experiments, and numerical simulations. It was found that porous coating stabilizes Mack’s second mode and destabilizes Mack’s first mode. However, there are only few studies on the stabilization efficiency of porous coating. And no work has been reported about the thermochemi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Spacecraft and Rockets
سال: 2017
ISSN: 0022-4650,1533-6794
DOI: 10.2514/1.a32984