Implementation of multiaxial high cycle fatigue criterion in finite element analysis
نویسندگان
چکیده
منابع مشابه
Multiaxial high-cycle fatigue criterion and life prediction for metals
A new high-cycle fatigue criterion based on the critical plane approach is proposed in this paper. Unlike most of the other multiaxial fatigue criteria based on the critical plane approach, the critical plane is directly correlated with the fatigue fracture plane. The proposed criterion has a wide range of applicability from very ductile metals to extremely brittle metals. Mean stress effect is...
متن کاملMultiaxial Fatigue Analysis in a High-speed Microgenerator Rotor Shaft
Fatigue evaluation is one of the most concerning issue in the design of mechanical parts subject to alternative forces. Fatigue life estimation is more complicated when loads act on different axes. This paper shows the stress analysis result of the steel shaft of a high-speed microgenerator rotor with 47750 rpm and 100kW which has been carried out with analytical stress formulation. The shaft i...
متن کاملMultiaxial fatigue reliability analysis of railroad wheels
A general methodology for fatigue reliability degradation of railroad wheels is proposed in this paper. Both fatigue crack initiation and crack propagation life are included in the proposed methodology using previously developed multiaxial fatigue models by the same authors. A response surface method in conjunction with design of experiments is used to develop a closed form approximation of the...
متن کاملFinite element analysis of fatigue damage in passenger-car diesel engine cylinder head under cyclic thermo-mechanical loadings
In this article, the thermo-mechanical fatigue lifetime of the cylinder head of a passenger-car diesel engine has been estimated. At the first stage, stress and strain distributions in the cylinder head have been calculated using the two-layer visco-plastic model, available in the ABAQUS software. The calibration of the model was performed, using correlating of simulated hysteresis curves and l...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2016
ISSN: 2261-236X
DOI: 10.1051/matecconf/20167701022