Improvement in Mechanical and Thermal Properties of Graphite Flake/Cu Composites by Introducing TiC Coating on Graphite Flake Surface
نویسندگان
چکیده
منابع مشابه
Diffusion and drift of graphene flake on graphite surface.
Diffusion and drift of a graphene flake on a graphite surface are analyzed. A potential energy relief of the graphene flake is computed using ab initio and empirical calculations. Based on the analysis of this relief, different mechanisms of diffusion and drift of the graphene flake on the graphite surface are considered. A new mechanism of diffusion and drift of the flake is proposed. Accordin...
متن کاملElectrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method
There are described nanocomposites based on ultra high molecular weight polyethylene and graphite nanoplates prepared by in-situ polymerization method. It is carried out a comprehensive study of electric properties of these composites, including direct current (dc) and alternating current (ac) properties. There is explored dependence of the conductivity and dielectric permeability on filler con...
متن کاملDevelopment of Coating Thickness Instrument for Graphite/epoxy Composites
The ability to measure the thickness of paint on graphite/epoxy composite structures directly would be of benefit in the aerospace industry. The weight reduction would increase fuel mileage for the airline customer. An additional reason for reducing the thickness of paint on graphite/epoxy composites is not as obvious as the weight savings. A concern in the use of composite structures has been ...
متن کاملAnisotropic Thermal and Electrical Properties of Thin Thermal Interface Layers of Graphite Nanoplatelet-Based Composites
Thermal interfacematerials (TIMs) are crucial components of high density electronics and the high thermal conductivity of graphite makes this material an attractive candidate for such applications. We report an investigation of the in-plane and through-plane electrical and thermal conductivities of thin thermal interface layers of graphite nanoplatelet (GNP) based composites. The in-plane elect...
متن کاملImprovement of vibrodamping properties of polyvinyl acetate–graphite composites by electron beam processing of the filler
The effect of electron beam processing (energy 900 keV, absorbed dose in the range from 25 to 600 kGy) of graphite upon the efficiency of its use as a filler in polyvinyl acetate (PVA) based vibrodamping composites is studied. Graphite treatment at optimal doses above 200 kGy is found to provide a significant increase of damping loss factor for these composites at ambient and especially at elev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2019
ISSN: 2075-4701
DOI: 10.3390/met9050519