Improving off-road vehicle handling using an active anti-roll bar
نویسندگان
چکیده
منابع مشابه
Stereo Perception on an Off-Road Vehicle
Ab8tnzctThis paper presents a vehicle for autonomous &-road navigation built in the framework of DAFWA’s PerceptOR program. Special emphask is given to the percep tion system. A set of three stereo camera pairs pravide calor and SD data in a wide fleld of view (-ter 100 d e gree) at high resolution (2160 by 480 pixel) and high frame rates (6 H5). Thin is made possible by integrating a powerful ...
متن کاملVehicle Roll and Road Bank Angles Estimation
Abstract: Driving safety can be enhanced by better understanding of risk situation, which can be achieved by the knowledge of vehicle dynamic states as well as the road geometry. Among the parameters of the road that have an influence on vehicle dynamics, one can find the bank angle, which can not however be measured by low cost onboard sensors. In this paper, a new method of road bank angle an...
متن کاملFatigue Failure and Damage Analysis of an Anti-roll Bar Subjected to Fatigue Experiments
The available fatigue theories have been examined using simple specimens subjected to bending or tension-compression loads. Therefore, the stress fields have been generally one or two dimensional. Anti-roll bar is a component belongs to the suspension system of the vehicles. In spite of having simple circular section, due to the having several curvatures, this component experiences a three-dime...
متن کاملFree and forced vibration analysis on finite element model of an off-road vehicle
In the present paper, the modal analysis on a full finite element model of an off-road vehicle. This vehicle was modeled in the CATIA software and then meshed in the HYPERMESH software. The free vibration analysis was conducted by the ABAQUS software. By applying an external displacement, the forced vibration analysis was also performed. As a result, natural frequencies and shape modes were ext...
متن کاملThe Overbot: An Off-Road Autonomous Ground Vehicle Testbed
The Overbot, originally designed to run the DARPA Grand Challenge, has been retasked as an off-road autonomous vehicle testbed. The base chassis is a Polaris Ranger 6x6 gasoline powered off-road vehicle. It has a single cylinder 30 HP engine capable of propelling the vehicle to over 40 mph. In addition to the chassis, the Overbot is equipped with a SiCK LiDAR on a custom gimbaled mount, a color...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Terramechanics
سال: 2010
ISSN: 0022-4898
DOI: 10.1016/j.jterra.2009.09.003