Incorporating Solution-Processed Mesoporous WO3 as an Interfacial Cathode Buffer Layer for Photovoltaic Applications
نویسندگان
چکیده
منابع مشابه
A solution-processed bathocuproine cathode interfacial layer for high-performance bromine-iodine perovskite solar cells.
Perovskite film generally has rough surface morphology due to the voids between the grain domains. Smoothed interface contact between the perovskite layer and the top electrode is critical for planar perovskite solar cells. We reported high efficiency bromine-iodine based perovskite solar cells with a flattening cathode interface by incorporating a solution-processed bathocuproine (sBCP) interf...
متن کاملEnhanced efficiency of inverted polymer solar cells by using solution-processed TiOx/CsOx cathode buffer layer
In this work, a double-buffer film of TiOx coated with CsOx (TiOx/CsOx) was solution prepared to be applied in poly(3-hexylthiophene):indene-C60 bisadduct (P3HT:ICBA) and P3HT:[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) inverted polymer solar cells (PSCs). Compared with TiOx films and CsOx films, the TiOx/CsOx double-buffer film exhibited a favorable energy-level alignment among TiOx, CsO...
متن کاملUtilising solution processed zirconium acetylacetonate as an electron extracting layer in both regular and inverted small molecule organic photovoltaic cells
Interfacial layers are commonly employed in organic photovoltaic (OPV) cells in order to improve device performance. These layers must be transparent, stable, be compatible with the photo-active materials and provide efficient charge extraction with a good energetic match to the relevant organic material. In this report we demonstrate the compatibility of zirconium acetylacetonate (ZrAcac) elec...
متن کاملFabrication and characterization of WO3/Ag/WO3 multilayer transparent anode with solution-processed WO3 for polymer light-emitting diodes
The dielectric/metal/dielectric multilayer is suitable for a transparent electrode because of its high-optical and high-electrical properties; however, it is fabricated by an expensive and inefficient multistep vacuum process. We present a WO3/Ag/WO3 (WAW) multilayer transparent anode with solution-processed WO3 for polymer light-emitting diodes (PLEDs). This WAW multilayer not only has high tr...
متن کاملSolution processed tungsten oxide interfacial layer for efficient hole-injection in quantum dot light-emitting diodes.
A highly efficient and stable QLED using an inorganic WO3 nanoparticle film as a hole injection layer is demonstrated.The resulting WO3 nanoparticle-based QLEDs also exhibit superior performance compared to that of the present PEDOT:PSS-based QLEDs. The results indicate that WO3 nanoparticles are promising solution-processed buffer layer materials and serve as a strong candidate for QLED techno...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Physical Chemistry A
سال: 2020
ISSN: 1089-5639,1520-5215
DOI: 10.1021/acs.jpca.0c02912