Influence of grid resolution, parcel size and drag models on bubbling fluidized bed simulation

3D Eulerian simulation of a gas-solid bubbling fluidized bed: assessment of drag coefficient correlations

Fluidized beds have been widely used in power generation and in the chemical, biochemical, and petroleum industries. The 3D simulation of commercial scale fluidized beds has been computationally impractical due to the required memory and processor speeds. However, in this study, 3D Computational Fluid Dynamics simulation of a gas-solid bubbling fluidized bed is performed to investigate the effe...

Fundamental Bubbling Characteristics in a Rotating Fluidized Bed: Modeling and Measurement of Bubble Size

Modeling and measurement of bubble size in a rotating fluidized bed (RFB) were conducted. The model for predicting the bubble growth in RFB has been proposed based on the following concepts: (i) local centrifugal acceleration and excess gas velocity are considered as the parameters in the radial direction, and (ii) bubble volume flow locally changes depending on the radial distance. Bubbling be...

Hydrodynamic Modelling and CFD Simulation of Gas-Solid Bubbling Fluidized Bed

This work presents a computational study of flow behaviour in a bubbling fluidized bed. The model is developed by using the commercial CFD code Fluent 6.3. The model is based on an Eulerian description of the gas and the particle phase. Different drag models are used and compared. The computational results are validated against experimental results. The experimental data are taken from Hulme (2...

Verification of the Importance of Introducing Particle Size Distributions to Bubbling Fluidized Bed Simulations

Fluidized beds are widely used in industrial operations due to their ability to give good mixing and a high contact area between the phases. The excellent controlling ability of temperature allows good operating conditions for solid catalyzed gas phase reactions and also the ease of the design. Powders used in industrial ‡uidized beds have a particle size distribution, and the particle size dis...

Analysis of different drag Models for bubbling fluidized beds using CFD