Integrated Process Design and Control of Cyclic Distillation Columns
نویسندگان
چکیده
منابع مشابه
Analysis and Control of Distillation Columns
Here MI is the total holdup inside the column, and MD and MB are the condenser and reboiler holdups. S = yD(1 xB) (1 yD)xB is the separation factor and Is = DyD(1 yD) + BxB(1 xB) is the \impurity sum". Note that Is may be extremely small for columns with both products of high purity (1 yD and xB both small) resulting in very large linearized values of 1. The response to changes in the internal ...
متن کاملInternally Heat-integrated Distillation Columns: a Review
The heat-integrated distillation column to be addressed in this paper is a special distillation column that involves internal heat integration between the whole rectifying and the whole stripping sections. An overview of the research on this process is presented in this work. It covers from the thermodynamic development and evaluations to the practical design and operation investigations for th...
متن کاملShortcut Design of Extractive Distillation Columns
Extractive distillation is a common process for the separation of homogeneous azeotropic mixtures. In this process entrainer feed flowrate and reflux ratio of the extractive column represent the crucial design degrees of freedom which govern feasibility and operating cost. In this work feasibility and operational stability of the extractive column is related to the analysis of the nonlinear dyn...
متن کاملOptimal Design Methodology for Azeotropic Distillation Columns
We develop a short and optimal design methodology for multicomponent mixtures, based on the concept of minimum difference in composition. The minimum reflux ratio is calculated through an analytical procedure, which allowing their use in multicomponent mixtures. The procedure also includes a simple criterion to optimize the structural design of the column, without increasing energy consumption....
متن کاملIntegration of Design and Control for Energy Integrated Distillation
A systematic computer aided analysis of the process model is used as a pre-solution step for integration of design and control problem. In this paper, a static energy integrated distillation plant model is first presented, then the analysis is presented for a single distillation column, subsequently the column analysis is extended with the analysis for the heat pump. The analysis relates to the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2018
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2018.09.368