Investigating the Failure Mechanism of Jointed Rock Slopes Based on Discrete Element Method
نویسندگان
چکیده
منابع مشابه
Discrete element modeling of explosion-induced fracture extension in jointed rock masses
The explosion process of explosives in a borehole applies a very high pressure on its surrounding rock media. This process can initiate and propagate rock fractures, and finally, may result in the rock fragmentation. Rock fragmentation is mainly caused by the propagation of inherent pre-existing fractures of the rock mass and also from the extension of the newly formed cracks within the intact ...
متن کاملVariation of Failure Mechanisms of Slopes in Jointed Rock Masses with Changing Scale
This paper demonstrates the ability of Shear Strength Reduction (SSR) analysis based on the Finite Element Method (FEM) to model the scale effects of discontinuity networks on the stability and failure mechanisms of slopes in blocky rock masses. Through three examples, it shows how these mechanisms depend on joint network geometry and change with increasing slope height. Introduction Scale Effe...
متن کاملRock Slope Stability Analysis Using Discrete Element Method
Rock slope stability depends very much on the strength features of the rock and the geometrical and strength characteristics of the discontinuities (e.g., roughness, wall strength and persistence). Since a rock mass is not a continuum, its behavior is dominated by such discontinuities as faults, joints and bedding planes. Also, Rock slope instability is a major hazard for human activities and o...
متن کاملA 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks
In this research work, a 3D numerical modeling technique is proposed based on the 3D particle flow code in order to investigate the failure mechanism of rock foundations. Two series of footings with different geometries and areas are considered in this work. The failure mechanism obtained is similar to that of the Terzaghi’s but there is a negligible difference in between. Lastly, one equation ...
متن کاملApplication of Cosserat Continuum Approach in the Finite Element Shear Strength Reduction Analysis of Jointed Rock Slopes
This paper focuses on the application of a continuum-based method in the Shear Strength Reduction (SSR) analysis of the stability of jointed rock slopes. In order to take into account the jointed nature of the material, the Finite Element Method (FEM) is formulated based on Cosserat theory. Also, it is assumed that failure of the equivalent material can result from failure of the joints, failur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Civil Engineering
سال: 2020
ISSN: 1687-8086,1687-8094
DOI: 10.1155/2020/8820158