Investigation of flow features around shallow round cavities subject to subsonic grazing flow

Investigation of flow features around shallow round cavities subject to subsonic grazing flow

Flow diversion around cavities in fractured media

[1] Flow diversion around subsurface cavities in unsaturated fractured media is important to numerous environmental and engineering applications. This paper provides analytical solutions to partial and complete flow diversion around cavities intersected by fractures under steady state conditions. It is focused on a typical trifracture junction located upstream from a cavity surface. Fractures a...

investigation of supersonic jet into compressible subsonic cross flow on the surfaces around the jet exit

an experimental study has been performed to investigate the flow physics of an under-expanded axisymmetric supersonic jet exhausting transversely from a flat plate into a subsonic compressible cross flow. the goal was to study the effects of boundary layer thickness ratio (δ/d) and the jet to free stream dynamic pressure ratio (j) on surface pressure. the resulting measurements distinctly show ...

3D Numerical Simulation of the Separated Turbulent Shallow Flow around a Single Side Obstacle

In this paper, the performance of Reynolds Averaged Navier Stokes (RANS) simulations was evaluated to predict the flow structure developed by the presence of a sidewall obstruction in a uniform open-channel shallow flow. The study of these flow structures is important because they present in several real world configurations, such as groynes in rivers, where the erosion processes, mass transpor...

Numerical and Empirical Investigation of Flow Separation Phenomenon around Semi-buried Pipelines due to Steady Currents

In this paper, in order to understand the flow-pipe interaction more clearly, the variations on flow pattern around semi-buried pipelines due to steady current have physically and numerically been investigated. In physical modeling section, the experiments have been carried out in a flume with 10 meter length, 0.3 meter width and 0.5 meter depth using a P.V.C pipe with 6.35 cm in diameter (for ...