Key considerations for finite element modelling of the residuum–prosthetic socket interface
نویسندگان
چکیده
منابع مشابه
Finite element modeling of the contact interface between trans-tibial residual limb and prosthetic socket.
Finite element method has been identified as a useful tool to understand the load transfer mechanics between a residual limb and its prosthetic socket. This paper proposed a new practical approach in modeling the contact interface with consideration of the friction/slip conditions and pre-stresses applied on the limb within a rectified socket. The residual limb and socket were modeled as two se...
متن کاملNumerical investigation on the pullout shear strength of soil-nail interface using finite element method
Soil nailing is a popular reinforcement method for stabilizing slopes, excavations, and retaining walls in many countries. The pullout capacity of the soil-nail interface is a critical parameter for the design and safety assessment of soil-nailed systems. In this paper, a three-dimensional (3D) finite element (FE) model is developed using the commercial program ABAQUS to simulate the pullout te...
متن کاملFinite-Element Modelling of Biotransistors
Current research efforts in biosensor design attempt to integrate biochemical assays with semiconductor substrates and microfluidic assemblies to realize fully integrated lab-on-chip devices. The DNA biotransistor (BioFET) is an example of such a device. The process of chemical modification of the FET and attachment of linker and probe molecules is a statistical process that can result in varia...
متن کاملPrototype Hardware for Finite Element Modelling
Dept. of Electrical Engineering, The University of Lampung, Gedung H FT, Jalan Prof. Sumantri Brojonegoro No. 1, Bandar Lampung, 35145, Indonesia, Tel. (62) 0721 701609 Ext.219, Fax. (62) 0721 704947, [email protected] 2 Department of Mathematics, UMIST, PO Box 88, Sackville St., Manchester, M60 1QD, UK Tel. (44) 0161 200 8978, Fax. (44) 161 200 3669, [email protected] 3 Department of ...
متن کاملMultigrid on the Interface for Mortarmixed Finite Element Methods
We consider mixed nite element approximations of second order elliptic equations on domains that can be described as a union of sub-domains or blocks. We assume that the subdomain grids are locally deened and need not match across the block boundaries. Specially chosen mortar nite element spaces are introduced on the interfaces for approximating the scalar variable (pressure). The mortars also ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Prosthetics & Orthotics International
سال: 2020
ISSN: 0309-3646,1746-1553
DOI: 10.1177/0309364620967781