Kinetic modelling for heavy metal adsorption using Jordanian low cost natural zeolite (fixed bed column study)

kinetic modeling of heavy metals adsorption on fixed bed column

the adsorption of lead (11) and copper (11) in a fixed bed column using activated carbonprepared from nipa palm nut was investigated. thomas model and yoon and nelson kinetic models were used to analyze the column performance. the rate constant for thomas model increased with increase in flow rate and initial ion concentration but remained constant at varying bed height. adsorption capacity for...

Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column

In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...

Disinfection and removal performance for Escherichia coli and heavy metals by silver-modified zeolite in a fixed bed column

Application of mathematical empirical models to dynamic removal of lead on natural zeolite clinoptilolite in a fixed bed column

This study examined the applicability of the mathematical empirical models by Bohart-Adams, Wolborska, Thomas and Yoon-Nelson on lead removal from aqueous solutions on a fixed bed of natural zeolite. Applicability of these models has been evaluated by fitting the experimental breakthrough curves with the curves obtained from the applied model. Experimental results have shown that the values of ...

Fixed Bed Column Modeling of Cd(II) Adsorption on Bone Char Using Backward Bayesian Multiple Linear Regression

In this work, the backward Bayesian multiple linear regression (BBMLR) as a new approach is presented to predict the adsorption efficiency (AE) of Cd(II) ions by ostrich bone char (OBC) in the fixed bed adsorption with four operational variables consisting of pH (2-9), inlet Cd(II) concentration (Co= 25-100 mg/L), bed depth (h= 3-9 cm) and feed flow rate (Q= 0.5-30 mL/min). The performance of t...