Laser metal deposition of compositionally graded TiZrNbTa refractory high-entropy alloys using elemental powder blends
نویسندگان
چکیده
منابع مشابه
DIRECT LASER DEPOSITION OF Ti-6Al-4V FROM ELEMENTAL POWDER BLENDS
A thin-wall structure composed of Ti-6Al-4V has been deposited using direct laser deposition (DLD) from blended Ti, Al, and V elemental powders. The microstructure and composition distribution along the build height direction were intensively investigated using optical microscopy, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), and Vickers hardness testing. The micr...
متن کاملHigh tunability in compositionally graded epitaxial barium strontium titanate thin films by pulsed-laser deposition
Compositionally graded barium strontium titanate @(BaxSr12x)TiO3—BST, x50.75, 0.8, 0.9, and 1.0# thin films are fabricated by pulsed-laser deposition on a LaAlO3 substrate with (La0.7Sr0.3)MnO3 as the bottom electrode. A high dielectric permittivity and temperature characteristic without Curie–Weiss law are obtained. A tunability of over 70% is obtained at frequency of 1 MHz, which is higher th...
متن کاملThe Effect of Powder Recycling in Direct Metal Laser Deposition on Powder and Manufactured Part Characteristics
A potential way of improving the material efficiency and cost effectiveness of the Direct Metal Laser Deposition (DMLD) process is to take powder that is not utilised in each deposition attempt and re-use it in subsequent attempts (powder recycling). Currently, this is not widely implemented for fear of a detrimental effect on part quality. This study examines how powder recycling, using simple...
متن کاملCompositionally graded YSZ-NiO composites by surface laser melting
Laser surface melting has been applied to near eutectic NiO-YSZ sintered ceramics. The objective is to generate a functional gradient composite material with graded microstructure and composition. At low solidification rates the resultant material has a graded composition, with a severe NiO segregation towards the surface. A thick NiO layer whose thickness depends on the travelling speed is for...
متن کاملComponent repair using laser direct metal deposition
Recent studies have indicated that laser direct metal deposition can be used for repairing deep or internal cracks and defects in metallic components. In order to implement the method, it is necessary to machine a groove or slot to the depth of the defect and refill it. This work investigates advantages and potential problems with the technique and compares the results from using two different ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Additive Manufacturing
سال: 2019
ISSN: 2214-8604
DOI: 10.1016/j.addma.2018.10.042