Liquefaction resistance improvement of silty sands using cyclic preloading

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of state parameter, fines content, and overburden stress on CPT resistance in silty sands

Cone penetration resistance in sands with fines contents up to 35% is explored through drained cylindrical cavity expansion simulations with a modified MIT-S1 constitutive model. The constitutive model is calibrated to sands with 0%, 10%, 20%, and 35% low-plasticity fines with data from constant volume direct simple shear, drained and undrained triaxial compression, shear wave velocity, and 1D-...

متن کامل

Impact of Micropiles Installation on Liquefaction Potential of Saturated Silty Sand Using Numerical Method

This paper investigates the effect of micropile installation into saturated sandy soil by means of finite element method. The obtained results from numerical modeling are compared with the received data from the site. The validation of software has been done by simulating standard penetration test. The effect of some changes in spacing (3m, 1.6m and 0.8m) and injection pressure (1cm, 2.5cm, 5cm...

متن کامل

Strength-Flow Parameters of Loose Silty Sands From Piezocone Tests

Piezocone penetration tests with dissipation phases are particularly useful for geotechnical site characterization. They also provide three independent readings with depth from a single sounding as well as time-rate information. In past investigations, only silty sands with specific silt content have been tested and complete sets of tests have not been conducted to evaluate the influence of dif...

متن کامل

evaluation of undrained shear strength of loose silty sands using cpt results

series of undrained monotonic triaxial tests and cone penetration tests were conducted on loose silty sand samples to study correlation between undrained shear strength of silty sands (sus) and piezocone test results. cpt tests were conducted at 27 silty sand samples in calibration chamber. the results indicate that, in low percent of silt (0-30%), as the silt content increases, the undrained s...

متن کامل

Evaluation of uniform delivery of colloidal nano-Silica stabilizer to liquefiable silty sands

Liquefaction is one of the most important and complex topics in geotechnical earthquake engineering. In recent years, passive site stabilization method has been proposed for non-disruptive mitigation of liquefaction risk at developed sites susceptible to liquefaction using colloidal nano-silica stabilizer. In this research, 4 box models were used to investigate the ability to uniformly deliver ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IOP Conference Series: Materials Science and Engineering

سال: 2021

ISSN: 1757-8981,1757-899X

DOI: 10.1088/1757-899x/1114/1/012016