Material characterization of workability and process imaging for robotic concrete finishing
نویسندگان
چکیده
منابع مشابه
Development and Characterization of Synthetic Tissue- Equivalent Material for CT Imaging Applications
Introduction: The use of a simple tissue analog material in the fabrication of medical computed tomography (CT) imaging phantoms has great potential to help researchers. The purpose of the present study is to develop new gel tissue-equivalent materials and determine whether their CT numbers and relative electron densities vary in CT images obtained by scans at different energie...
متن کاملSoft Material Characterization for Robotic Applications
In this article we present mechanical measurements of three representative elastomers used in soft robotic systems: Sylgard 184, Smooth-Sil 950, and EcoFlex 00-30. Our aim is to demonstrate the effects of the nonlinear, time-dependent properties of these materials to facilitate improved dynamic modeling of soft robotic components. We employ uniaxial pull-to-failure tests, cyclic loading tests, ...
متن کاملRelation between the Workability and Strength of Self-compacting Concrete
This paper presents the results of an experimental research on the workability and compressive strength of self-compacting concrete. The work focused on concrete mixes having water/binder ratios of 0.35 and 0.45, which contained constant total binder contents of 500 kg/m and 400 kg/m, respectively. The concrete mixes contained four different dosages of a superplasticizer based on carboxylic wit...
متن کاملthe composite of “paper clay”, characterization of material properties, abilities and workability from an art perspective
the usage of ceramic composites in order to improve the workability and properties of clay already has past a long history behind. in spite of the fact that clay by its own is a flexible and appropriate material for sculpting and ceramic making, it also carries some problems, flaws and imperfections (such as cracking, heaviness and etc.) which make it somehow troublesome to work with. from the ...
متن کاملMeasurement of Workability of Fresh Concrete Using a Mixing Truck
The main objective of this study is to evaluate the workability of fresh portland cement concrete while it is still in the mixing truck by determining fundamental rheological parameters (plastic viscosity and yield stress). Nine concrete mixtures with different values of yield stress and plastic viscosity were tested in a concrete truck. The measurements made with the truck were based on the ty...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction Robotics
سال: 2021
ISSN: 2509-811X,2509-8780
DOI: 10.1007/s41693-021-00058-9