Measurement Uncertainty in Battery Electrochemical Impedance Spectroscopy

نویسندگان

چکیده

Electrochemical impedance spectroscopy (EIS) is a widely used method for battery tests in manufacturing and automotive field applications. As such, accurate measurement of the over broad frequency spectrum high relevance, also requiring specific calibration methods evaluation error bounds. Here, we report first time comprehensive uncertainty analysis calibrated EIS batteries. We aim to identify two sources, fixture repeatability noise, evaluate their effect on measured impedances. To this end, an model assigned each them real imaginary parts parameters are characterized range 100 mHz–5 kHz by performing measurements shunt resistor short standard. demonstrate how different uncertainties combined with impedances, incorporating procedure. The errors propagated through correction functions applying linear propagation provided UncLib package from METAS. bounds derived standard prismatic cell verified conducting series measurements. Thereby, shown as ellipsoids every point Nyquist plot. For instance, at 1 Hz, 34-Ah shows real-part deviation 1.07 $\text{m}\Omega $ ± notation="LaTeX">$26~ \mu \Omega .

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An integrated approach to electrochemical impedance spectroscopy

A philosophy for electrochemical impedance spectroscopy is presented which integrates experimental observation, model development, and error analysis. This approach is differentiated from the usual sequential model development for given impedance spectra by its emphasis on obtaining supporting observations to guide model selection, use of error analysis to guide regression strategies and experi...

متن کامل

Sensing Estrogen with Electrochemical Impedance Spectroscopy

This study demonstrates the application feasibility of electrochemical impedance spectroscopy (EIS) in measuring estrogen (17β-estradiol) in gas phase. The present biosensor gives a linear response (R2 = 0.999) for 17β-estradiol vapor concentration from 3.7 ng/L to 3.7 × 10-4 ng/L with a limit of detection (3.7 × 10-4 ng/L). The results show that the fabricated biosensor demonstrates better det...

متن کامل

Reducing Impedance Fluctuation by Electrode Structure for Electrochemical Impedance Spectroscopy

In this paper, we investigated the electrode structure of the electrical bio-sensor to reduce impedance measurement fluctuation. Five pairs of the same electrodes were formed on the PCB substrate, and a fluidic channel was constructed with a double-sided tape and polycarbonate cover so that all the electrodes had the same reagent distribution. In order to find an electrode structure with little...

متن کامل

A Contactless Electrochemical Impedance Measurement Method

We present the first demonstration of a passive, contactless method to interrogate electrochemical impedance (EI) via a microfabricated MEMS coil. EI measurement was achieved using the principle of reflected impedance between a pair of inductively coupled coils. Ionic concentration and electrolyte temperature were wirelessly transduced from measurement electrodes connected to a microfabricated ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IEEE Transactions on Instrumentation and Measurement

سال: 2022

ISSN: ['1557-9662', '0018-9456']

DOI: https://doi.org/10.1109/tim.2022.3198466