Mechanical behavior and microstructures of aluminum processed by low strain amplitude multi-directional confined forging
نویسندگان
چکیده
منابع مشابه
Texture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree
It has been clarified that deformation and annealing of martensite starting structure can produce ultrafine-grained structure in low carbon steel. This study aims to investigate the texture evolution and mechanical properties of samples with martensite structure deformed by two different forging processes. The martensitic steel samples were forged by plane strain compression and multi-directio...
متن کاملPrediction of forging force and barreling behavior in isothermal hot forging of AlCuMgPb aluminum alloy using artificial neural network
In the present investigation, an artificial neural network (ANN) model is developed to predict the isothermal hot forging behavior of AlCuMgPb aluminum alloy. The inputs of the ANN are deformation temperature, frictional factor, ram velocity and displacement whereas the forging force, barreling parameter and final shape are considered as the output variable. The developed feed-forward back-prop...
متن کاملMechanical Behaviour of Pure Aluminum Processed by Constrained Groove Pressing
In recent years, the fabrication of bulk materials with ultra fine grain sized materials processed by SPD methods. Different techniques have been used to introduce large plastic strains in to bulk metals such as Equal Channel Angular Pressing (ECAP) [1-3], Accumulative Roll Bonding (ARB) [4-7], Repetitive Corrugation and Straitening (RCS) [8,9], Constrained Groove Pressing (CGP) [5] and Constra...
متن کاملThe mechanical and thick section bending behavior of friction stir processed aluminum plate
Friction stir processing (FSP) 2519-T87 aluminum plate results in enhanced ductility, 25% strain at fracture. However, the yield strength in the FSP zone drops to 175 MPa from �400 MPa. Actively cooling the plate during FSP increases the yield strength to 185 MPa and decreases ductility to 20% strain at fracture. Thick bending of a plate of the alloy was demonstrated after the surface was subje...
متن کاملMicrostructures and Mechanical Properties of Pure V and Mo Processed by High-Pressure Torsion
Two body centered cubic (bcc) metals, V and Mo, were processed by high pressure torsion (HPT) at ambient temperature. Hardness variation as well as microstructural evolution was examined with strain under a pressure of 2 to 6GPa. It was shown that the hardness increases with straining and saturates to a constant level with the grain size of 330–400 nm in V irrespective of the applied pressures....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2020
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2020.01.065