Mechanical Model for Shear Friction Capacity of Concrete at Construction Joints
نویسندگان
چکیده
منابع مشابه
Shear-friction truss model for reinforced concrete beams
This paper presents a new model, called the "shear-friction truss model," for slender reinforced concrete beams to derive a clear and simple design equation for their ultimate shear strength. In this model, a portion of the shear strength is provided by shear reinforcement as in the traditional truss model, and the remainder by the shear-friction mechanism. Friction resistance is derived consid...
متن کاملConcrete Shear Wall Construction
Buildings with cast-in-situ reinforced concrete shear walls are widespread in many earthquake-prone countries and regions, such as Canada, Chile, Romania, Turkey, Colombia, the republics of the former Soviet Union, etc. This type of construction has been practiced since the 960s in urban regions for mediumto high-rise buildings (4 to 35 stories high). Shear wall buildings are usually regular in...
متن کاملStepwise Regression for shear capacity assessment of steel fiber reinforced concrete beams
The addition of steel fibers into concrete improves the postcracking tensile strength of hardened concrete and hence significantly enhances the shear strength of reinforced concrete reinforced concrete beams. However, developing an accurate model for predicting the shear strength of steel fiber reinforced concrete (SFRC) beams is a challenging task as there are several parameters such as the co...
متن کاملDevelopment of Shear Capacity Equations for Rectangular Reinforced Concrete Beams
The problem of shear is not yet fully understood due to involvement of number of parameters. Designers are extra careful about shear, especially in beams and consequently higher safety factors are used in shear design. Several equations are available in literature to determine the shear capacity of beams, i.e. ACI equation, Zsutty equation and KIM & White equation. To verify the application of ...
متن کاملA mathematical model for optimization of strength of concrete: A case study for shear modulus of Rice Husk Ash Concrete
Rice Husk Ash (RHA) is natural Pozzolan containing reactive silica and/or aluminum. When the material is mixed with lime in powdered form and in the presence of water, it will set and harden like cement. This work uses Osadebe’s optimization model to optimize the shear modulus of concrete made from RHA. The strengths predicted by the model are in good agreement with their corresponding experime...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2018
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2018/9264503