Mechanical properties of ultra-high pressure sintered sphene (CaTiSiO5)
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMicrostructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملMechanical properties of sintered meso-porous silicon: a numerical model
: Because of its optical and electrical properties, large surfaces, and compatibility with standard silicon processes, porous silicon is a very interesting material in photovoltaic and microelectromechanical systems technology. In some applications, porous silicon is annealed at high temperature and, consequently, the cylindrical pores that are generated by anodization or stain etching reorgani...
متن کاملFabrication and Mechanical Properties of Sintered Leucite Body
for leucite using natural minera} potash feldspar as the major raw material, followed by bal) milling. A sintered leucite body with a 99.0% re)atiye density was obtained by heating the leucite powder cylindrical pellet at 12500C for 1 h. The mechanical properties of this dense teucite body were determined. The bending strength, fracture toughness, e)astic modulus and Vickers hardness of the bod...
متن کاملSynthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology
Nano-structured sphene (CaTiSiO5) powder was synthesized via mechanical activation and heat treatment method. The synthesized powder was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and simultaneous thermal analysis (STA). The sphene scaffolds were then fabricated via porogen method (using citric acid). Response surface methodology was successfully used to d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processing and Application of Ceramics
سال: 2016
ISSN: 1820-6131,2406-1034
DOI: 10.2298/pac1604295a