Mechanical Property Evaluation of Micro Cantilever Fabricated Using Micro-Stereolithography
نویسندگان
چکیده
منابع مشابه
Projection micro-stereolithography using digital micro-mirror dynamic mask
We present in this paper the development of a high-resolution projection micro-stereolithography (P SL) process by using the Digital Micromirror Device (DMDTM, Texas Instruments) as a dynamic mask. This unique technology provides a parallel fabrication of complex three-dimensional (3D) microstructures used for micro electro-mechanical systems (MEMS). Based on the understanding of underlying mec...
متن کاملMechanical Property Evaluation of Electrodeposited Nanocrystalline Metals by Micro-testing
Electrodeposition is a very important technology in the fabrication of micro-compo‐ nents for micro-electro-mechanical systems (MEMS) or integrated circuits. Evalua‐ tions of the materials used in these devices as 3D components should be conducted using micro-sized specimens due to the sample size effect on the practical use of the components. Nanocrystalline metals could be deposited using an ...
متن کاملCone-beam computed tomography images of phantoms with simulating trabecular bone structure fabricated using micro-stereolithography.
OBJECTIVE Phantoms with simulating mandibular trabecular bone structure fabricated using micro-stereolithography were applied for a quantitative evaluation of cone-beam computed tomography (CT) images. MATERIALS AND METHODS Phantoms with a three-dimensional lattice, in which a square pillar was set at 0.10, 0.20, 0.30 and 0.40 mm at the edge, spaced at 0.60 mm, were made of an acrylic resin u...
متن کاملBiofunctional Photopolymers for Micro-Stereolithography
Vienna University of Technology, Institute of Applied Synthetic Chemistry, Getreidemarkt 9/163-MC, A-1060 Vienna, Austria E-mail: [email protected] ** Ludwig Boltzmann Institute of Osteology at the Hanusch Hospital of WGKK and AUVA Trauma Centre Meidling.4 Medical Department , Heinrich Collin-Strasse 30, A-1140 Vienna, Austria *** Vienna University of Technology, Institute of Mat...
متن کاملSiGeC Cantilever Micro Cooler
The fabrication and characterization of SiGeC cantilever microcoolers are described. Silicon on insulator (SOI) was used as the substrate, and two layers of 3 μm p-SiGe0.07C0.0075 and 1.14 μm n-SiGe0.07C0.0075 lattice matched to silicon were grown using molecular beam epitaxy. The uni couple cooler was fabricated using conventional integrated circuit (IC) processing, and the cantilever structur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Sensors and Micromachines
سال: 2007
ISSN: 1341-8939,1347-5525
DOI: 10.1541/ieejsmas.127.102