Media arrangement impacts cell growth in anaerobic fixed-bed reactors treating sugarcane vinasse: Structured vs. randomic biomass immobilization

GASIFICATION vs COMBUSTION OF WASTE/BIOMASS IN FLUIDIZED BED REACTORS

This paper presents a comparison of commercial fluidized bed gasifiers and combustors used to recover energy from municipal solid wastes and biomass. The work reported here is excerpted from four case studies prepared for the International Energy Agency’s Bioenergy Agreement, under Task 23 (Energy from Thermal Conversion of MSW and RDF, 1998-2000) and Task 36 (Energy from Integrated Solid Waste...

assessment of a fixed biomass anaerobic reactor for the treatment of vinasse

the cane alcohol vinasse assessment on the removal efficiency of a fixed biomass anaerobic reactor (fbar) was evaluated. crude vinasse was used to feed the reactor. the fbar was operated with organic load rate (olr) of 0.5, 1, 3 and 6 gcod/l/d. removal efficiencies of 85, 82, 75 and 66 per cent were observed respectively. the fba reactor presented an excellent removal of organic matter, however...

Anaerobic Degradation of Nonionic and Anionic Surfactants in Enrichment Cultures and Fixed-bed Reactors

-Anaerobic biodegradation and inhibitory effects of nonionic and anionic surfactants on methanogenic fermentation were tested in incubation experiments with anoxic sediment samples and sewage sludge. Alkylsulfonates and alkylbenzenesulfonates were not degraded but inhibited methanogenesis from sludge constituents at concentrations 1> 10 mg l-k Sodium dodecylsulfate was at least partly degraded ...

24 Fixed Film Stationary Bed and Fluidized Bed Reactors

Effect of the chemical nature of fixed-bed reactor support materials on bioreactor performance and biomass accumulation

This study investigated the effect, on reactor performance and biomass retention inside the bed, of the material used to make the supports of anaerobic fixed-bed reactors. Three inert supports of similar shape but made of three different materials polyvinyl chloride, polypropylene, high-density polyethylene were manufactured and used. All three supports had the same specific surface area but di...