Metal-Ceramic Interfaces Produced by Laser Melt Injection Processing
نویسندگان
چکیده
منابع مشابه
Metal-ceramic joining by laser
Within the scope of increase in cutting tools efficiency, a CW CO;! laser beam has been used for butt welding sintered tips containing cobalt and tungsten carbide to a medium carbon steel core. After optimization of the laser processing conditions, full penetrating, sound and homogeneous welds are observed. Hardness is found to be nearly constant across the entire weld bead cross-section. Micro...
متن کاملDislocation Nucleation at Metal-ceramic Interfaces
Ab~act-The ductile vs brittle behaviour of metal-ceramic interfaces is discussed within an atomistic framework, in which the mechanical response of an interfucial crack is assumed to be ultimately controlled by the competition between atomic decohesion and dislocation nucleation ahead of the crack tip. As in later versions of the Rice-Thomson model, this competition may be evaluated in terms of...
متن کاملCeramic/metal Nanocomposites by Lyophilization: Processing and Hrtem Study
This work describes a wet-processing route based on spray-freezing and subsequent lyophilization designed to obtain nanostructured ceramic/metal powders. Starting from the ceramic powder and the corresponding metal salt, a water-based suspension is sprayed on liquid nitrogen. The frozen powders are subsequently freeze-dried, calcined and reduced. The material was analyzed using X-ray diffractio...
متن کاملOn the low temperature mixing processes in metal/ceramic interfaces
Heavy ions in materials science can be used for many applications concerning changes in composition, structure and physical properties. The modification of interfaces in bi-layer samples is frequently performed by ion beam mixing experiments [1-4]. However, the mixing behaviour of the components is much more complicated than in the earlier studied metal/metal systems, because of the more comple...
متن کاملOnline Melt Pool Temperature Control for Laser Metal Deposition Processes
Melt pool temperature is of great importance to deposition quality in Laser Metal Deposition processes. To control the melt pool temperature, an empirical process model describing the relationship between the temperature and process parameters (i.e., laser power, powder flow rate, and traverse speed) is established and verified experimentally. A general tracking controller using the Internal Mo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials and Manufacturing Processes
سال: 1995
ISSN: 1042-6914,1532-2475
DOI: 10.1080/10426919508935109