METALLIC PHASE FORMING IN BARBOTAGE OF MULTICOMPONENT OXIDE MELT BY REDUCTION GAS REPORT 3. FERRONICKEL AND OXIDE MELT SEPARATION
نویسندگان
چکیده
منابع مشابه
Application of Functionalized Graphene Oxide Nanosheet in Gas Separation
Graphene oxide nanosheet (GONS) can be a suitable membrane for gas separation with high permeability and selectivity. Separation of N2/CO2 using functionalized GONS was investigated by molecular dynamics simulations. The simulated systems were comprised of two types of GONS with a pore in their center, N2 and CO2 molecules. The selectivity and ...
متن کاملA pH Electrode Based on Melt-Oxidized Iridium Oxide
Fabrication and characterization of a novel potentiometric pH electrode based on melt-oxidized iridium oxide film is presented. The oxide film produced in a lithium carbonate melt has the composition of LixIrOy•nH2O, and shows high chemical stability. The electrode based on this oxide film exhibits very promising pH sensing performance, with an ideal Nernstian response in the tested pH range of...
متن کاملTexturing by cooling a metallic melt in a magnetic field.
Processing in a magnetic field leads to the texturing of materials along an easy-magnetization axis when a minimum anisotropy energy exists at the processing temperature; the magnetic field can be applied to a particle assembly embedded into a liquid, or to a solid at a high diffusion temperature close to the melting temperature or between the liquidus and the solidus temperatures in a region o...
متن کاملProcessing of Bulk Metallic Glass Foams by Melt Infiltration Techniques
Processing of bulk metallic glass (BMG) foams, using melt infiltration techniques, is reported for the first time. Foaming methods based on infiltration of two types of pattern materials are described: investment of a continuous refractory yielding very low relative density structures (5% dense relative to the BMG), and investment of a discontinuous refractory pellet bed yielding higher relativ...
متن کاملStability of polyethylene oxide in matrix tablets prepared by hot-melt extrusion.
The thermal stability of polyethylene oxide (PEO) in sustained release tablets prepared by hot-melt extrusion was investigated. The weight average molecular weight of the polymer was studied using gel permeation chromatography. The chemical stability of PEO was found to be dependent on both the storage and processing temperature, and the molecular weight of the polymer. Storage of the polymer a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Visshikh Uchebnykh Zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy
سال: 2017
ISSN: 2410-2091,0368-0797
DOI: 10.17073/0368-0797-2017-12-960-965