Microstructure of Reduced Ni Films from Electroless Plating Bath Containing NaBH4 as Reducing Agent
نویسندگان
چکیده
منابع مشابه
Electroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملCopper electroless plating in weakly alkaline electrolytes using DMAB as a reducing agent for metallization on polymer films
Copper electroless plating at low pH (7–9) using dimethylamine borane complex as a reducing agent is studied electrochemically by linear sweep voltammetry, cyclic voltammetry and chronopotentiometry in full electrolytes. We find that the mixed potential theory is not applicable to the described system. We show that both the working potential and the rate-controlling mechanism are dependent on t...
متن کاملCapillary Zone Electrophoresis for Electroless Plating Bath Samples
Capillary zone electrophoresis was used in the analysis of anions and cations in electroless plating bath samples. Examples described in this application note include the analysis of inorganic and organic anions in nickel-plating baths, cations in nickel-iron-cobalt-plating baths and metal-EDTA complexes in plating bath waste. Sample preparation was minimal, consisting merely of diluting the sa...
متن کاملBath and Deposit Monitoring System for Electroless Nickel Plating Process
Electroless nickel plating is a widely used plating method in many industries. The usability of the coating is, however, restricted by the control problems related to the electroless nickel plating process. To ensure deposit quality, the transcendent properties of electroless nickel deposit should be accurately controlled during plating, which is challenging because of the spontaneous, unstable...
متن کاملStructural Characterization and Mechanical Properties of As-plated and Heat Treated Electroless Ni-B-P Alloy Coatings
The Ni-B-P alloy coatings were made autocatalytically (electroless) using an alkaline plating bath with nickel chloride hexahydrate (NiCl2.6H2O) as the source of nickel ions, sodium borohydride (NaBH4) and sodium hypophosphite (NaH2PO2) as reducing agents and source of boron and phosphorous ions, respectively. The effects of bath concentrations on the plating rate, composition of coating, surfa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1972
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.23.38