Miniaturized auto-focusing VCM actuator with zero holding current
نویسندگان
چکیده
منابع مشابه
A miniaturized resonant-type smooth impact drive mechanism actuator
A smooth impact drive mechanism (SIDM) is one type of piezoelectric actuator that has been put into practical use. In previous SIDMs, soft-type multilayered piezoelectric elements with low mechanical quality factors were utilized, which meant it was difficult to generate high output power, and the multilayered structure was an obstacle to further miniaturization. We have proposed a resonant-typ...
متن کاملAn Operator Based Modeling and Compensation of VCM Actuator Pivot Friction in a 1.8-Inch HDD
The pivot friction of voice-coil-motor (VCM) actuator is measured for a 1.8-inch small disk drive with disk rotating and slider flying. The measurement is carried out under the conditions that the actuator is controlled and the head movement amplitude is growing by changing the references. The hysteresis of friction versus head position is then obtained. An operator based modeling approach is a...
متن کاملMiniaturized high-NA focusing-mirror multiple optical tweezers.
An array of high numerical aperture parabolic micromirrors (NA = 0.96) is used to generate multiple optical tweezers and to trap micron-sized dielectric particles in three dimensions within a fluidic device. The array of micromirrors allows generating arbitrarily large numbers of 3D traps, since the whole trapping area is not restricted by the field-of-view of the high-NA microscope objectives ...
متن کاملOne-DOF Precision Position Control using the Combined Piezo-VCM Actuator
This paper presents the control performance of a highprecision positioning device using the hybrid actuator composed of a piezoelectric (PZT) actuator and a voice-coil motor (VCM). The combined piezo-VCM actuator features two main characteristics: a large operation range due to long stroke of the VCM, and high precision and heavy load positioning ability due to PZT impact force. A one-degree-of...
متن کاملAccurate Supply Current Testing of Mixed-signal Ic Using Auto-zero Voltage Comparator
A novel approach to the dynamic supply current sensing based on the measurement of voltage drop across a parasitic resistance of the supply voltage metal line is presented. Then, auto-zero technique for voltage comparator offset cancellation, which provides very accurate and sensitive low voltage measurement is proposed. Therefore, we may use this as a current monitor for dynamic current testin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2009
ISSN: 1094-4087
DOI: 10.1364/oe.17.009754