Modeling of interlayer contact and contact pressure during fused filament fabrication
نویسندگان
چکیده
منابع مشابه
Colored fused filament fabrication
Fig. 1. Our technique enables color printing with precisely controlled gradients using a filament printer. Le : The printer is equipped with an o -the-shelf nozzle that inputs multiple filaments (three in the picture) and outputs molten mixed plastic through a single exit hole. Such devices cannot directly be used to print gradients: the transition between mixtures takes time, and this timing v...
متن کاملEffect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat
The hot gases produced by the internal combustion engines passes through the exhaust valve and causes high temperatures in the exhaust valve and its seat. To avoid damaging the exhaust valve, heat must be transferred from the valve to its seat during the contact they make at the opening and closing cycle. Heat transfer rate from the exhaust valve to its seat is a function of many factors. One o...
متن کاملA Study on the Contact Ellipse and the Contact Pressure During the Wheel Wear through Passing the Tracks including Several Sharp Curves
Wheel wear has been a concern in the railway for several decades. Studying the form change of the wheel/rail contacts in particular railways consisting of sharp curves helps to identify the risk of severe or catastrophic wear to minimize maintenance costs in order to be competitive in the transportation business. In this paper, the wheel/rail contact was studied on the particular railways. The ...
متن کاملSimple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication.
The uptake of microfluidics by the wider scientific community has been limited by the fabrication barrier created by the skills and equipment required for the production of traditional microfluidic devices. Here we present simple 3D printed microfluidic devices using an inexpensive and readily accessible printer with commercially available printer materials. We demonstrate that previously repor...
متن کاملModeling and Simulation of Spherical and Cylindrical Contact Theories for Using in the Biological Nanoparticles Manipulation
The low Young's modulus of biological particles results in their large deformation against the AFM probe forces; therefore, it is necessary to study the contact mechanics of bioparticles in order to predict their mechanical behaviors. This paper specifically deals with the contact mechanics of DNA nanoparticles with spherical and cylindrical shapes during manipulation. In previous studies, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Rheology
سال: 2019
ISSN: 0148-6055,1520-8516
DOI: 10.1122/1.5093033