Molten Titanium Flow in a Mesh Cavity by the Flow Visualization Technique

Flow Visualization Around a Non - Circular Tube

The flow behavior around a cam shaped tube in cross flow has been investigated experimentally using flow visualization and pressure distribution measurement. The range of attack angle and Reynolds number based on an equivalent circular diameter are within 0 ≤ α ≤ 360˚ and 2 x 104 < Reeq < 3.4 x 104, respectively. The pressure drag features are clarified in relation to the flow behavior around t...

the effects of changing roughness on the flow structure in the bends

flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...

A change of the leading player in flow Visualization technique

FLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS

The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be con...

Flow Visualization by Conditional Sampling of a Single X-Wire Probe in a Very Long Run Experiment

Flow visualization techniques using tracer markers such as die, smoke, hydrogen bubbles, etc., have been widely used in experimental investigations of large scale structures of a variety of flow fields. They have played an important role in understanding the physics of the coherent structures' formation and evolution in the transitional as well as the turbulent regions of the flow fields. Howev...