MONITORING OF FLANK WEAR AND DAMAGE ON TURNING CUTTING TOOLS BY IMAGE PROCESSING
نویسندگان
چکیده
منابع مشابه
Optical Flank Wear Monitoring of Cutting Tools
An optoelectronic method for in situ monitoring of the flank wear of cutting tools is presented. The method is based on real time vision technology in which the tool is illuminated by the beam of a laser and the wear zone is visualized using a Vidicon camera. The image is converted into digital pixel data and processed, to detect the wear land width. Detailed aspects of the image processing pro...
متن کاملInvestigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...
متن کاملMachine Vision System for Inspecting Flank Wear on Cutting Tools
This paper describes the development of a machine vision system for automated tool wear inspection. The proposed approach measures the tool wear region based on the active contour algorithm and classifies the wear type by means of neural networks. Test results show that prevalent tool wears can be checked robustly in a real production environment and therefore the manufacturing automation can b...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملFlank Wear Model of Cutting Tools Using Control Theory
A model of the flank wear of cutting tools is developed by using linear control theory. The flank wear is assumed to consist of a mechanically activated and a thermally activated component. The wear process is mathematically treated as a feedback process, whereby the progressive wear raises the cutting forces and temperature thereby increasing the thermally activated wear-rate, and contributes ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Engineering and Exact Sciences
سال: 2020
ISSN: 2527-1075
DOI: 10.18540/jcecvl6iss2pp0098-0106