Multi-layer masonry bed joint subjected to shear: Analytical modelling
نویسندگان
چکیده
منابع مشابه
A Study of the Progressive Degradation of Masonry Shear Walls Subjected to Harmonic Loading
This masonry research investigated the differences in the static and dynamic stiffness for the seismic range of loads and frequencies for a pressed clay masonry wythe. The effective stiffness has been defined in Newtonian physics and Damage Mechanics. This research used the concept of measured stiffness defined as the measured stress field divided by the measured strain field. A two-part test r...
متن کاملEnergy Absorption Analysis and Multi-objective Optimization of Tri-layer Cups Subjected to Quasi-static Axial Compressive Loading
In this paper, the energy absorption features of tri-layer explosive-welded deep-drawn cups subjected to quasi-static axial compressive loading are investigated numerically and experimentally. To produce the cups, tri-layer blanks composed of aluminum and stainless steel alloys were fabricated by an explosive-welding process and formed by a deep drawing setup. The quasi-static tests were carrie...
متن کاملEnhancing Performance of Infill Masonry With Skin reinforcement Subjected To Cyclic Load
Masonry infill has been widely used as building material due to its cost effectiveness and availability. The failure of these masonry infill walls during the past earthquakes have underscored the importance of ensuring the safety of the infill walls when it is subjected to lateral loads. In-plane and out of plane failures have been observed in many reinforced concrete framed building with maso...
متن کاملModelling of multi layer beam with inter-layer slips
However, the calculation and the realization of such structures requires particular knowledge and experience. That is why the construction of such structures is something exceptional. In addition to the anisotropy of material wood, the spatial structure of laminated and screwed beams has a structural anisotropy. They constitute highly unspecified static systems. Currently the engineer does not ...
متن کاملMulti-layer modelling of a multimedia application
With the increasing deployment of ATM, application oriented QoS measures become more and more important. In order to investigate relationships between QoS measures on different protocol layers, end system models describing these layers have to be developed. In this paper, a case study for the modelling of a multi-media application comprising video and audio components is presented. The model co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2019
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2019.02.051