Multi Objective Optimization of Nano-composite Non-asbestos Friction Lining Material using Grey Relation Analysis (GRA)
نویسندگان
چکیده
منابع مشابه
Multi-objective Optimization of Edm Parameters Using Grey Relation Analysis
This paper involves the multi-objective optimization of process parameters of AlSi10Mg/9 wt% alumina/3 wt% graphite in Electrical Discharge Machining for obtaining minimum surface roughness, minimum tool wear rate and maximum material removal rate. The important machining parameters were selected as peak current, flushing pressure and pulse-on time. Experiments were conducted by selecting diffe...
متن کاملMulti Objective Optimization on Insulated Residential Roof with Solar Water Heating System Using Grey Relation Analysis (RESEARCH NOTE)
In this work, a multi-objective optimization on novel insulated roof with solar water heating system at low material cost has been carried out through Taguchi based grey relational analysis technique. The novel roofs have concrete, insulating polyurethane, and a channel of water in a metallic pipe tunneling the chromium block. Chromium block is used to conduct more heat to raise the water to re...
متن کاملMulti-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملGra Approach for Multi-objective Optimization of Laser Cutting
Laser cutting is a complex multi-input multi-output machining process. To satisfy different requirements regarding laser cut quality it is necessary to determine optimal laser cutting conditions. This paper demonstrates the application of the grey relational analysis for optimization of different laser cut quality characteristics such as the depth of separation line, drag line separation and bu...
متن کاملMulti-objective Optimization of a Composite Material Spring Design Using an Evolutionary Algorithm
A multi-objective evolutionary algorithm is applied to optimize the design of a helical spring made out of a composite material. The criteria considered are the minimization of the mass along with the maximization of the stiffness of the spring. Considering the computation time required for finite element analyses, the optimization is performed using approximate relations between design paramet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/1004/1/012014