Neutron detection devices with 6LiF converter layers
نویسندگان
چکیده
منابع مشابه
بهینه‌سازی پاسخ دزیمتری نوترون در بازه انرژی حرارتی و سریع برای آشکارساز دیودی
During the last few years, real time gamma and neutron dosimeters have been developed and semiconductor diodes are frequently used in these dosimeters. Semiconductor diodes are used to charged particle detection. For sensitizing the detector to neutrons, a converter layer is contacted on the front surfaces of them. Incident neutrons interact with the converter and produce charged particles that...
متن کاملEstimate the Performance of Catalytic Converter Using Turbulence Induce Devices
In this manuscript, the experimental setup was designed and fabricated for optimizing the parameters of a catalytic converter of INDICA V2 exhaust system. Three turbulence intensify devices, namely Swirl Venturi, Swirl Blades and Swirl Contour, were close-fitted before the catalytic converter. The heating element is embedded in its body and thermocouples are used for knowing the performance at ...
متن کاملPassive neutron area monitor with CR39
Background: In high-intensity, mixed and pulsed neutron fields the use of spectrometers or area monitors with active detectors is useless in these conditions neutron measuring devices must have a passive detector. Here a passive neutron area monitor with CR39 track detector was designed and the response was calculated. Materials and Methods: The response of a passive neutron area monitor with C...
متن کاملNeutron Optical Devices of Pnpi
Presently different optical devices are used practically at all modern neutron sources to form neutron beams. The basic event in forming neutron optics at PNPI was creation of highly efficient polarizing mirror on the glass substrate in 1972 [1,2]. It had a polarizing Ñî 60 Fe 40 coating and an antireflective Ti 85 Gd 15 underlayer. The coatings were prepared by vacuum thermal evaporation of ma...
متن کاملMulti-level Converter with Optimal Number of Power Electronic Devices
In this paper, a new topology for cascaded multilevel converter based on sub multilevel converter units and full-bridge converters is proposed. The proposed topology significantly reduces the number of dc voltage sources, switches, IGBTs, and power diodes as the number of output voltage levels increases. Also, an algorithm to determine dc voltage sources magnitudes is proposed. To synthesize ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2018
ISSN: 2100-014X
DOI: 10.1051/epjconf/201817001004