New high fill-factor triangular microlens array fabrication method using UV proximity printing
نویسندگان
چکیده
منابع مشابه
Concave Microlens Array Mold Fabrication in Photoresist Using UV Proximity Printing
This paper presents a simple and effective method to fabricate a polydimethyl-siloxane (PDMS) microlens array with a high fill factor, which utilizes the UV proximity printing and photoresist replication methods. The concave microlens array mold was made using a printing gap in lithography process, which utilizes optical diffraction of UV light to deflect away from the aperture edges and produc...
متن کاملNew Horizontal Frustum Optical Waveguide Fabrication Using UV Proximity Printing
This paper presents a novel method to fabricate the horizontal frustum structure as a planar optical waveguide by using the proximity printing technique. A horizontal frustum optical waveguide with a both lateral and vertical taper structure was produced. The orthogonal and inclined masks with the diffraction effect were employed in lithography process. This method can precisely control each ho...
متن کاملLarge Area Full Fill Factor Microlens Arrays
Production of microlens arrays using the resist reflow technique has been extensively reported1,2. Theses arrays have fill factors approaching 75% and in lensed systems the unlensed light introduces noise into the imaging system. N T Gordon, C L Jones and D Purdy3 reported a sophisticated techniques able to create full fill, however, this is expensive. Davies and McCormick4, using optical litho...
متن کاملRapid Fabrication of Hydrogel Microstructures Using UV-Induced Projection Printing
Fabrication of hydrogel microstructures has attracted considerable attention. A large number of applications, such as fabricating tissue engineering scaffolds, delivering drugs to diseased tissue, and constructing extracellular matrix for studying cell behaviors, have been introduced. In this article, an ultraviolet (UV)-curing method based on a digital micromirror device (DMD) for fabricating ...
متن کاملFabrication of polymer microlens arrays using capillary forming with a soft mold of micro-holes array and UV-curable polymer.
This paper reports a simple and effective method to fabricate microlens arrays with the ultraviolet-curable resins, and a soft mold of micro-holes array. During capillary forming operation, the surface of the soft mold of micro-holes array is being pressed against the ultraviolet-curable resin layer coated on the plastic substrate. An array of convex lense can be formed in the circular holes of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microsystem Technologies
سال: 2008
ISSN: 0946-7076,1432-1858
DOI: 10.1007/s00542-008-0728-7