Nickel Based RTD Fabricated via Additive Screen Printing Process for Flexible Electronics
نویسندگان
چکیده
منابع مشابه
Highly efficient phosphorescent polymer OLEDs fabricated by screen printing
We demonstrate the use of screen printing in the fabrication of highly efficient phosphorescent polymer organic light-emitting devices (OLEDs) based on a green-emitting Ir(ppy)3 and a host polymer PVK. We incorporate PBD in the polymer host as an electron-transporting dopant and a-NPD as a hole-transporting dopant. The best screen-printed single-layer device exhibits very high peak luminous eff...
متن کاملA Stretchable Electromagnetic Absorber Fabricated Using Screen Printing Technology
A stretchable electromagnetic absorber fabricated using screen printing technology is proposed in this paper. We used a polydimethylsiloxane (PDMS) substrate to fabricate the stretchable absorber since PDMS exhibits good dielectric properties, flexibility, and restoring capabilities. DuPont PE872 (DuPont, Wilmington, CT, USA), a stretchable silver conductive ink, was used for the screen printin...
متن کاملScreen-Printing Fabrication and Characterization of Stretchable Electronics
This article focuses on the fabrication and characterization of stretchable interconnects for wearable electronics applications. Interconnects were screen-printed with a stretchable silver-polymer composite ink on 50-μm thick thermoplastic polyurethane. The initial sheet resistances of the manufactured interconnects were an average of 36.2 mΩ/◽, and half the manufactured samples withstood singl...
متن کاملTime – strain monitoring system fabricated via offset lithographic printing Time – strain monitoring system fabricated via offset lithographic printing
This paper reports progress in the development of strain sensors fabricated using the Conductive Lithographic Film (CLF) printing process. Strain sensitive structures printed via an unmodified offset lithographic printing press using a silver loaded conductive ink have been deposited concurrently with circuit interconnect, to form an electronic smart packaging system. A system populated with SM...
متن کاملScreen printed passive components for flexible power electronics
Additive and low-temperature printing processes enable the integration of diverse electronic devices, both power-supplying and power-consuming, on flexible substrates at low cost. Production of a complete electronic system from these devices, however, often requires power electronics to convert between the various operating voltages of the devices. Passive components-inductors, capacitors, and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2019
ISSN: 2169-3536
DOI: 10.1109/access.2019.2904970